Page 14 of 16

Re: How to program Central Configuration using FORScan

Posted: Fri Jun 14, 2019 10:36 pm
by Outformer
hi. How do I turn these two features on my 2017 car?
https://hizliresim.com/7BYZB5
https://hizliresim.com/JVXBWY

Re: How to program Central Configuration using FORScan

Posted: Fri Jun 28, 2019 6:49 pm
by maidus
So, i have recieved my STN2120 cable and was trying to change radio and instrument cluster language from Italian to English in Central Configuration (Main) It did download missing files and all went good, no errors popped up. But, now there are several DTC-s and my climate is acting WEIRD. There is little A/C and all heat comes very early in the temps, like 19celsius it blows pretty hot air.

Please, a little guidance here. Using latest Forscan build. I did run a relearn from that same menu fro PCM and RCM but nothing changed.

Image

===SASM DTC U0140:00-28===
Code: U0140 - Lost Communication With Body Control Module

===ABS DTC U0140:00-08===
Code: U0140 - Lost Communication With Body Control Module

===ABS DTC U0126:00-08===
Code: U0126 - Lost Communication With Steering Angle Sensor Module

===ABS DTC U0452:68-48===
Code: U0452 - Invalid Data Received From Restraints Control Module

===ABS DTC P1635:05-08===
Code: P1635 - Tire/Axle Out of Acceptable Range

===HVAC DTC U2101:00-28===
Code: U2101 - Control Module Configuration Incompatible

===RFA DTC U0140:00-08===
Code: U0140 - Lost Communication With Body Control Module

===ACM DTC U0140:00-28===
Code: U0140 - Lost Communication With Body Control Module

===IPC DTC P1607:87-2A===
Code: P1607 - MIL Output Circuit

===IPC DTC U0140:00-2A===
Code: U0140 - Lost Communication With Body Control Module

===IPC DTC U0151:00-2A===
Code: U0151 - Lost Communication With Restraints Control Module

Re: How to program Central Configuration using FORScan

Posted: Tue Jul 09, 2019 6:50 pm
by Outformer
To activate Aux, I need to write 03 to the program that focuses on the picture, I can't write using the forscan program.

https://imgyukle.com/i/kqEpC6
https://imgyukle.com/i/kqEGFy

Re: How to program Central Configuration using FORScan

Posted: Wed Jul 24, 2019 1:43 am
by thebestever025
Anyone try to add more feature to the icp I have a 2015 se . Just trying to get more features like drive modes and police mode on screen. where I can enable it on the fly. Thank you in advance

Re: How to program Central Configuration using FORScan

Posted: Sat Aug 10, 2019 1:37 pm
by TimFor
FORScan wrote:
Thu Jun 09, 2016 11:24 am
Focus Mk2 has no central configuration. Only Mk3/3.5 have one. Please use ElmConfig for Mk2 configuration programming.
This was written in 2016. What's the situation now? Does FORScan cover all of ElmConfig?

Re: How to program Central Configuration using FORScan

Posted: Tue Aug 20, 2019 9:54 am
by Vtprs
notmoby wrote:
Sun Jul 17, 2016 6:58 pm
Happy to report success enabling powerfold mirrors and puddle lights on a mk 7.5 Fiesta. Extended licence and Engineering mode needed in Central Configuration. Good work chaps!
Could you explain how i could do this to my Mk7.5 fiesta ? I have the mirrors and switch fitted how can i programme mine to be able to work ?
Regards
Valter

Re: How to program Central Configuration using FORScan

Posted: Tue Aug 20, 2019 9:58 am
by lollapalooza
Vtprs wrote:
Tue Aug 20, 2019 9:54 am
Eplain how i could do this to my Mk7.5 fiedta ? I have the mirrors and switch fitted how can i programme mine to be able to work ?
Regards
Valter
You just need to select the correct item from the drop down menu.
Check this same thread from the beginning.

Re: How to program Central Configuration using FORScan

Posted: Tue Sep 10, 2019 1:06 pm
by Viking88
Hi there new to all of this,
Attempted to enable global windows unsuccessfully and somehow lost my key.
Managed to get key back but now have these errors that wont clear
2014 focus 1.6 navigator TDCi

Re: How to program Central Configuration using FORScan

Posted: Tue Sep 10, 2019 3:09 pm
by Viking88
Is there anyway to regain original parameters after changing and not saving the original?

Re: How to program Central Configuration using FORScan

Posted: Fri Sep 13, 2019 5:11 pm
by Viking88
Thanks for the help folks, very much appreciated 🙄