How to program Central Configuration using FORScan

Car configuration discussions and experience sharing
alexixbox
Posts: 8
Joined: Fri Sep 27, 2019 5:17 pm
Vehicle: Kuga 1.5L flexfuel E85 Vignale - 2019 FRANCE
Location: France

Re: How to program Central Configuration using FORScan

Post by alexixbox » Wed Oct 02, 2019 1:12 pm

Hi,

I have the 2019 KUGA flexfuel E85 1.5L Ecoboost in France. I'm not able to get into BdyCM (Main) - central configuration, getting loading sbl failed message. It can't read block 1/6 then says service interrupted. Anyone can help?

I have WINT ODB2 USB interace https://www.amazon.fr/gp/product/B06XJ6 ... UTF8&psc=1

I succeed to add climate control and temperature on SYNC 3 screen with :
APIM - Climate button on Sync 3 screen
7D0-01-02: xxxx x3xx xxxx

APIM - See set climate temperature on Sync 3 screen
7D0-04-01: xxxx xxx0 xxxx

Thanks for your help

IronCross82
Posts: 3
Joined: Fri Sep 22, 2017 9:01 pm
Vehicle: 2017 F150 3.5l

Re: How to program Central Configuration using FORScan

Post by IronCross82 » Thu Oct 24, 2019 5:48 pm

Does anyone know if Forscan can change turbo boost pressure?
thanks again Scott

TimFor
Posts: 33
Joined: Wed Nov 02, 2016 3:06 pm
Vehicle: Ford Focus, 1,8 TDCI, 85kW, 2007.

Re: How to program Central Configuration using FORScan

Post by TimFor » Mon Nov 04, 2019 9:25 am

2.3.25 beta, 2019-09-28 says:
"+ Configuration and programming function "Central Configuration" for Mazda SKYACTIV
* Fixes and improvements in Central Configuration function (added missing parameters and values, fixed bugs etc) for Focus, C-Max, Kuga, Escape, Mondeo, S-Max, Ranger, Everest, Transit and Transit Connect family, added missing support for Transit Courier (B460)"
I'd still like to see a reply to my question:
TimFor wrote:
Sat Aug 10, 2019 1:37 pm
FORScan wrote:
Thu Jun 09, 2016 11:24 am
Focus Mk2 has no central configuration. Only Mk3/3.5 have one. Please use ElmConfig for Mk2 configuration programming.
This was written in 2016. What's the situation now? Does FORScan cover all of ElmConfig?

jrhollins1975
Posts: 2
Joined: Mon Nov 04, 2019 11:50 am
Vehicle: Fords Fiesta & CMax 2016

Re: How to program Central Configuration using FORScan

Post by jrhollins1975 » Mon Nov 04, 2019 5:09 pm

This is probably a really stupid and obvious question,but I have been searching the forums for a few hours now and although a similar question to mine has been asked several times it doesn't seem to have an answer.

I have installed Forscan on my windows 10 pc and am using a modified ELM327 connector. I have registered the software with the trial extended licence and have connected without issue to My UK 2016 Ford Fiesta Titanium 1.0 Eco boast.

I have just retro-fitted a factory SAT nav and I need to change MFD4 to MFD5 and Change the NAV unit to EU. Now these changes need to be made in ~Engineering mode, however I do not have this option under configuration and programming.

Even when I use the system in Demo mode the engineering options are not presented.

The opening page of this forum mentions Fiesta family is this going to be the reason. Or do I have to pay for a 1 year licence which if it works I am more than happy to do. Kinda struggling as I cant get my tip meter out of KM at moment

jrhollins1975
Posts: 2
Joined: Mon Nov 04, 2019 11:50 am
Vehicle: Fords Fiesta & CMax 2016

Re: How to program Central Configuration using FORScan

Post by jrhollins1975 » Tue Nov 05, 2019 8:35 am

Just an update, yes I was right it was a stupid question. I just needed to choose the central configuration and select the play button. Duh!!

alexixbox
Posts: 8
Joined: Fri Sep 27, 2019 5:17 pm
Vehicle: Kuga 1.5L flexfuel E85 Vignale - 2019 FRANCE
Location: France

No acces to Central Configuration BdyCM Main using FORScan in KUGA 2019 flexfuel 1.5L Ecoboost E85

Post by alexixbox » Sun Nov 10, 2019 9:16 am

alexixbox wrote:
Wed Oct 02, 2019 1:12 pm
Hi,

I have the 2019 KUGA flexfuel E85 1.5L Ecoboost in France. I'm not able to get into BdyCM (Main) - central configuration, getting loading sbl failed message. It can't read block 1/6 then says service interrupted. Anyone can help?

I have WINT ODB2 USB interace https://www.amazon.fr/gp/product/B06XJ6 ... UTF8&psc=1

I succeed to add climate control and temperature on SYNC 3 screen with :
APIM - Climate button on Sync 3 screen
7D0-01-02: xxxx x3xx xxxx

APIM - See set climate temperature on Sync 3 screen
7D0-04-01: xxxx xxx0 xxxx

Thanks for your help
Is there anybody can help me ?
Thanks for your help

naym ravate
Posts: 1
Joined: Sun Nov 10, 2019 4:38 pm
Vehicle: Ranger 3.2 2015

Re: How to program Central Configuration using FORScan

Post by naym ravate » Mon Nov 11, 2019 2:42 pm

MORNING .I NEED HELP I AM MOZAMBIQUE I GOT TIS ISSUE IN MAZDA BT 50 2011 MODEL
I NEED TO USE FORSCAN TO SOLVE


===IPC DTC U2300:56-28===
Code: U2300 - Central Configuration

Additional Fault Symptom:
- Invalid/Incompatible Configuration

Status:
- Previously Set DTC - Not Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC

Module: Instrument Panel Control Module

Freeze Frame :
-REALTIME: 143234246 s - Total time ECU has been active
-TOTAL_DIST: 0.0 km - Total Distance
-MAINECUV: 12.25 V - Main ECU voltage supply
-OUTDR_TMP: -40 °C - Outdoor Air Temperature
-PWR_MODE_QF: Power Mode OK - Power Mode Quality Factor
-PWR_MODE_KEY: Key Out - Power Mode Key State
===END IPC DTC U2300:56-28===

seven666
Posts: 2
Joined: Sun Nov 17, 2019 1:03 pm
Vehicle: fusion,2.0t,245,2018

Re: How to program Central Configuration using FORScan

Post by seven666 » Mon Nov 18, 2019 9:09 am

👍good

Post Reply