How to program Central Configuration using FORScan

Car configuration discussions and experience sharing
Outformer
Posts: 5
Joined: Fri May 31, 2019 7:19 pm
Vehicle: 2015 1.6 ti-vct

Re: How to program Central Configuration using FORScan

Post by Outformer » Fri Jun 14, 2019 10:36 pm

hi. How do I turn these two features on my 2017 car?
https://hizliresim.com/7BYZB5
https://hizliresim.com/JVXBWY

maidus
Posts: 1
Joined: Mon May 27, 2019 5:30 pm
Vehicle: mondeo, 2.0 tdci 163hp, 2011

Re: How to program Central Configuration using FORScan

Post by maidus » Fri Jun 28, 2019 6:49 pm

So, i have recieved my STN2120 cable and was trying to change radio and instrument cluster language from Italian to English in Central Configuration (Main) It did download missing files and all went good, no errors popped up. But, now there are several DTC-s and my climate is acting WEIRD. There is little A/C and all heat comes very early in the temps, like 19celsius it blows pretty hot air.

Please, a little guidance here. Using latest Forscan build. I did run a relearn from that same menu fro PCM and RCM but nothing changed.

Image

===SASM DTC U0140:00-28===
Code: U0140 - Lost Communication With Body Control Module

===ABS DTC U0140:00-08===
Code: U0140 - Lost Communication With Body Control Module

===ABS DTC U0126:00-08===
Code: U0126 - Lost Communication With Steering Angle Sensor Module

===ABS DTC U0452:68-48===
Code: U0452 - Invalid Data Received From Restraints Control Module

===ABS DTC P1635:05-08===
Code: P1635 - Tire/Axle Out of Acceptable Range

===HVAC DTC U2101:00-28===
Code: U2101 - Control Module Configuration Incompatible

===RFA DTC U0140:00-08===
Code: U0140 - Lost Communication With Body Control Module

===ACM DTC U0140:00-28===
Code: U0140 - Lost Communication With Body Control Module

===IPC DTC P1607:87-2A===
Code: P1607 - MIL Output Circuit

===IPC DTC U0140:00-2A===
Code: U0140 - Lost Communication With Body Control Module

===IPC DTC U0151:00-2A===
Code: U0151 - Lost Communication With Restraints Control Module

Outformer
Posts: 5
Joined: Fri May 31, 2019 7:19 pm
Vehicle: 2015 1.6 ti-vct

Re: How to program Central Configuration using FORScan

Post by Outformer » Tue Jul 09, 2019 6:50 pm

To activate Aux, I need to write 03 to the program that focuses on the picture, I can't write using the forscan program.

https://imgyukle.com/i/kqEpC6
https://imgyukle.com/i/kqEGFy

Post Reply