BCM Calibration files

Car configuration discussions and experience sharing
Post Reply
Jaafar88
Posts: 13
Joined: Wed Mar 03, 2021 2:04 pm
Vehicle: Ford Fusion, Hybrid Titanum, 2019

BCM Calibration files

Post by Jaafar88 »

Hi there.
I, urgently, need the the Calibration files of the BCM of Ford Explorer 2011 Limited with 4WD Auto parking.
I flashed the BCM with different Calibration files I got the Dome lights flashing.
TRIED Factory AB Data but no way.
There is no way to download any other calibration Data as the Available Field is empty.

Kind Regards,
Jaafar
arvymodus
Posts: 2
Joined: Fri Jan 17, 2020 12:47 pm
Vehicle: ford transit, 2.2 tdci 103kw/140hp, 2012

Re: BCM Calibration files

Post by arvymodus »

get it as built data from here by vin, then load from file. You can find it here https://www.motorcraftservice.com/AsBuilt
Jaafar88
Posts: 13
Joined: Wed Mar 03, 2021 2:04 pm
Vehicle: Ford Fusion, Hybrid Titanum, 2019

Re: BCM Calibration files

Post by Jaafar88 »

arvymodus wrote:
Sat Jun 26, 2021 8:45 am
get it as built data from here by vin, then load from file. You can find it here https://www.motorcraftservice.com/AsBuilt
Thanks indeed.
However, this is only the As Built Data not the specific calibration file.
Regards
MoJo88
Posts: 213
Joined: Mon May 18, 2020 12:18 pm
Vehicle: Mondeo Vignale 210ps 2017

Re: BCM Calibration files

Post by MoJo88 »

You would need to do the research to find out what files you need. Once you've done this, post the files needed and I'll upload them.
Post Reply