Sync 3.4 US to EU maps - Nav in motion

Car configuration discussions and experience sharing
Post Reply
Zyrgon
Posts: 3
Joined: Tue Jul 28, 2020 7:19 am
Vehicle: Mustang V8 USA 2017

Sync 3.4 US to EU maps - Nav in motion

Post by Zyrgon »

Hello everyone,

I have converted Canadian (US) Sync to Sync 3.4 EU - everything works fine, just wonder about enabling the Navigation/usb/sms message read in motion.

As standard 7D0-02-01 is meant to be changed to 5753 or x7xx in first set, however if I do so my country code (currently set for PL) logically changes and all langauges are reset back to US countrycode, therefore all EU languages dissapear.

Did anyone face the same situation and founf solution ?

Thank you

Note: Mustang 2017 GT/CS Canadian
lenko
Posts: 604
Joined: Sat Dec 24, 2016 6:40 pm
Vehicle: 2015 Lincoln MKC, 2006 Mustang GT, Saleen 530 HP

Re: Sync 3.4 US to EU maps - Nav in motion

Post by lenko »

Run APIM (not the Asbuilt) and see if you have this line:
Ability to change address in motion - Disabled
(click on Disabled and change to Enabled and hit write).
This may logically change it to the proper setting if available in the Euro Sync.
Zyrgon
Posts: 3
Joined: Tue Jul 28, 2020 7:19 am
Vehicle: Mustang V8 USA 2017

Re: Sync 3.4 US to EU maps - Nav in motion

Post by Zyrgon »

Thank you for response.

No such option exists, therefore, still the same story :/
Post Reply