Rear Camera without zoom function higher then 3.4.20196

Car configuration discussions and experience sharing
Post Reply
Palawan-Taucher
Posts: 6
Joined: Sat Mar 21, 2020 5:02 pm
Vehicle: Ford S-Max DTD CRI 2.0L 2018 (2015 MY)

Rear Camera without zoom function higher then 3.4.20196

Post by Palawan-Taucher »

Hello all,

i have until sync 3.4.20196 no problems at all with my S-Max and the APIM.
After i update to higher then 3.4.20196 the zoom button in the screen
is without function, i can push/click it, but it only change his color,
not the zoom it self.
maybe this is depense to other settings of trailer system, or rear camera, or rear radar sensors
or whats so ever ...

have any one this experience like me or have any tip or idea to solve this

my S-Max is from ~ 09-10 / 2018 the APIM is/was a MY18 maybe

can anybody give me a help please

Thanks and regards,

Joerg
3U5T-14G371-GDD S-Max 11/2018 2,0l TDi 150PS
consp
Posts: 108
Joined: Sat May 19, 2018 11:16 am
Vehicle: Fiesta 125hp 2017 (My13.25 Mk7.5, With EU Sync3)

Re: Rear Camera without zoom function higher then 3.4.20196

Post by consp »

The 3.4.20xxx version might respond to misconfigurations in the 7D0-08 and 7D0-09 asbuilt settings regions which have some options for the RVC. Change these to the defaults for you car if they are not set at that. It did not respond to those settings if the car did not support them on earlier versions but with later Sync versions this changed a bit. Maybe this is the issue, could be something else.
Palawan-Taucher
Posts: 6
Joined: Sat Mar 21, 2020 5:02 pm
Vehicle: Ford S-Max DTD CRI 2.0L 2018 (2015 MY)

Re: Rear Camera without zoom function higher then 3.4.20196

Post by Palawan-Taucher »

thanks consp for your answer,

do you have a sync3 APIM and your asbuild for me ?
so can equalize them or make my settings like yours

my APIM is :
3U5T-14G371-GDD...ESN : LXAX00L4
with 3.4.21020 in the moment

Thanks
3U5T-14G371-GDD S-Max 11/2018 2,0l TDi 150PS
Post Reply