2020 transit custom

Car configuration discussions and experience sharing
Post Reply
jimbo2
Posts: 3
Joined: Sat Jul 29, 2017 5:13 pm
Vehicle: kuga 2.0 2014

2020 transit custom

Post by jimbo2 »

Hi all, i have a 2020 transit custom with sync 2.5 system. I need to enable reverse camera but am not having much success. These dont have apim modules like other sync versions, from what i can see you enable camera in acm (audio control module). I have checked as built data which shows camera as not enabled with latest forscan version. I have enabled the camera checkbox and written the data and rebooted but the display doesnt change when reverse gear is engaged. I have found info for pin locations to input camera on rear of acm behind screen, am just struggling to actually enable the function!
Any help would be much appreciated. Thankyou :D
jimbo2
Posts: 3
Joined: Sat Jul 29, 2017 5:13 pm
Vehicle: kuga 2.0 2014

Re: 2020 transit custom

Post by jimbo2 »

Hi, anyone got any info on this please !
Thankyou 🙂
jimbo2
Posts: 3
Joined: Sat Jul 29, 2017 5:13 pm
Vehicle: kuga 2.0 2014

Re: 2020 transit custom

Post by jimbo2 »

Still struggling, any help please!
MoJo88
Posts: 214
Joined: Mon May 18, 2020 12:18 pm
Vehicle: Mondeo Vignale 210ps 2017

Re: 2020 transit custom

Post by MoJo88 »

PM me your VIN.
stanley.dawood
Posts: 10
Joined: Sun Dec 27, 2020 8:09 pm
Vehicle: transit custom ltd 2020

Re: 2020 transit custom

Post by stanley.dawood »

Hi Jimbo,

Wondering if you had any luck, ive got the same issue.

Stan
stanley.dawood
Posts: 10
Joined: Sun Dec 27, 2020 8:09 pm
Vehicle: transit custom ltd 2020

Re: 2020 transit custom

Post by stanley.dawood »

Any help would be greatly appreciated gents.
b3nyf
Posts: 8
Joined: Sun Mar 01, 2020 8:09 pm
Vehicle: smax 2.0 diesel 210bhp 2016

Re: 2020 transit custom

Post by b3nyf »

What camera are you guys purchasing for this please?
stanley.dawood
Posts: 10
Joined: Sun Dec 27, 2020 8:09 pm
Vehicle: transit custom ltd 2020

Re: 2020 transit custom

Post by stanley.dawood »

@b3nyf still trying to figure this out myself. No luck so far other then buying a pre made kit
Mozillasx1
Posts: 8
Joined: Tue May 04, 2021 2:54 pm
Vehicle: Transit custom 2020

Re: 2020 transit custom

Post by Mozillasx1 »

Is anyone willing to share some info on what hardware is needed to interface a reverse camera feed to sync 2.5.
I take it the InCarTec 27-317 kit for sync 2-3 is not compatible
Post Reply