How to enable rear view camera sync 2.5 without APIM and FCDIM module?

Car configuration discussions and experience sharing
stanley.dawood
Posts: 10
Joined: Sun Dec 27, 2020 8:09 pm
Vehicle: transit custom ltd 2020

Re: How to enable rear view camera sync 2.5 without APIM and FCDIM module?

Post by stanley.dawood »

Thank you
stanley.dawood
Posts: 10
Joined: Sun Dec 27, 2020 8:09 pm
Vehicle: transit custom ltd 2020

Re: How to enable rear view camera sync 2.5 without APIM and FCDIM module?

Post by stanley.dawood »

All up and working!! Just wanted to know if there is a way of getting guid lines on the screen
Mozillasx1
Posts: 8
Joined: Tue May 04, 2021 2:54 pm
Vehicle: Transit custom 2020

Re: How to enable rear view camera sync 2.5 without APIM and FCDIM module?

Post by Mozillasx1 »

Would you please share how you got this all sorted please
Mozillasx1
Posts: 8
Joined: Tue May 04, 2021 2:54 pm
Vehicle: Transit custom 2020

Re: How to enable rear view camera sync 2.5 without APIM and FCDIM module?

Post by Mozillasx1 »

Which harness are you guys using to interface this.
Is it the incartec 27-317 for sync 2 and 3 ?
Or some other
mrnitro
Posts: 2
Joined: Sat Mar 06, 2021 12:17 pm
Vehicle: ford fiesta connected mk8 95hp 2021

Re: How to enable rear view camera sync 2.5 without APIM and FCDIM module?

Post by mrnitro »

Mozillasx1 wrote:
Sat May 08, 2021 6:58 am
Would you please share how you got this all sorted please
This work on my Ford fiesta mk8 2021 Sync 2.5

you can connect the video cable directly to these pins on the audio control module.
14 is video +
25 is video -
Mozillasx1
Posts: 8
Joined: Tue May 04, 2021 2:54 pm
Vehicle: Transit custom 2020

Re: How to enable rear view camera sync 2.5 without APIM and FCDIM module?

Post by Mozillasx1 »

Thanks,
I take it the audio control module is located behind the screen?.
Is that the 54pin plug.
So do you power the camera from the rear of the van from reverse light?
Mozillasx1
Posts: 8
Joined: Tue May 04, 2021 2:54 pm
Vehicle: Transit custom 2020

Re: How to enable rear view camera sync 2.5 without APIM and FCDIM module?

Post by Mozillasx1 »

MoJo88 wrote:
Sat Jan 02, 2021 10:08 pm
727-08-02:

xxxx xxxx xX

Change X to

2 for Non-NA layout
3 for NA layout
4 for Non-NA layout with Split View
Mojo what do you mean my NA and non NA?
MoJo88
Posts: 204
Joined: Mon May 18, 2020 12:18 pm
Vehicle: Mondeo Vignale 210ps 2017

Re: How to enable rear view camera sync 2.5 without APIM and FCDIM module?

Post by MoJo88 »

North America one would assume.
Mozillasx1
Posts: 8
Joined: Tue May 04, 2021 2:54 pm
Vehicle: Transit custom 2020

Re: How to enable rear view camera sync 2.5 without APIM and FCDIM module?

Post by Mozillasx1 »

Thank you mr Mojo.
Now it makes sense
Post Reply