2019 Focus ST-Line APIM

Car configuration discussions and experience sharing
User avatar
foreverall
Posts: 8
Joined: Thu May 14, 2020 5:37 pm
Vehicle: New Focus,GTDIQ75 1.5T 184Ps,2019

2019 Focus ST-Line APIM

Post by foreverall » Sun May 24, 2020 8:37 am

hello, i want to change Sync 3 theme and splash screen in my 2019 Focus ST-Line

Im using ELM327 and forscan but i cant find APIM in my car.

Does anyone solved this problem?

roylion15
Posts: 183
Joined: Tue Aug 14, 2018 11:35 am
Vehicle: Fiesta ST, 1500, Ecoboost, 200 PK, 2019 model

Re: 2019 Focus ST-Line APIM

Post by roylion15 » Sun May 24, 2020 4:11 pm

Hello
No APIM, post your sync version ... it's basic SYNC or SYNC 3 ?
or you use a bad ELM 327 (without switch ?)
No support in PM without invitation, please ! - Holidays to 31 august 2020

User avatar
foreverall
Posts: 8
Joined: Thu May 14, 2020 5:37 pm
Vehicle: New Focus,GTDIQ75 1.5T 184Ps,2019

Re: 2019 Focus ST-Line APIM

Post by foreverall » Tue Jul 07, 2020 6:28 am

roylion15 wrote:
Sun May 24, 2020 4:11 pm
Hello
No APIM, post your sync version ... it's basic SYNC or SYNC 3 ?
or you use a bad ELM 327 (without switch ?)
sync 3 versoin is 3.4

ELM327 with switch

roylion15
Posts: 183
Joined: Tue Aug 14, 2018 11:35 am
Vehicle: Fiesta ST, 1500, Ecoboost, 200 PK, 2019 model

Re: 2019 Focus ST-Line APIM

Post by roylion15 » Tue Jul 07, 2020 9:00 am

Hello
There is no problem to modify the splash screens.
Forscan APIM direct config can do that .
In 3.4 : "Visual variant Design" mut be set to "ford classic" instead of "ford timeless" to obtain also the shutdown logo.
May be your ELM is defect if APIM is not detected.

Send VIN in PM please
No support in PM without invitation, please ! - Holidays to 31 august 2020

User avatar
foreverall
Posts: 8
Joined: Thu May 14, 2020 5:37 pm
Vehicle: New Focus,GTDIQ75 1.5T 184Ps,2019

Re: 2019 Focus ST-Line APIM

Post by foreverall » Wed Jul 08, 2020 5:07 pm

roylion15 wrote:
Tue Jul 07, 2020 9:00 am
Hello
There is no problem to modify the splash screens.
Forscan APIM direct config can do that .
In 3.4 : "Visual variant Design" mut be set to "ford classic" instead of "ford timeless" to obtain also the shutdown logo.
May be your ELM is defect if APIM is not detected.

Send VIN in PM please
have send you PM。 hoping for reply

Tomxxx
Posts: 6
Joined: Wed Nov 20, 2019 9:09 am
Vehicle: Ford Focus MK4 st-line 1.5T 2019

Re: 2019 Focus ST-Line APIM

Post by Tomxxx » Mon Aug 10, 2020 9:50 am

foreverall wrote:
Sun May 24, 2020 8:37 am
hello, i want to change Sync 3 theme and splash screen in my 2019 Focus ST-Line

Im using ELM327 and forscan but i cant find APIM in my car.

Does anyone solved this problem?
Yes,replace the GMW by a old one such as mk3's GWM.
after changing the theme ,replace the original GWM

Johnny_Wariat
Posts: 1
Joined: Sun Aug 16, 2020 11:12 am
Vehicle: Ford Focus mk4 1.0 125hp

Re: 2019 Focus ST-Line APIM

Post by Johnny_Wariat » Mon Aug 17, 2020 7:03 pm

I also have problem with forscan, after scanning forscan doesn't found Apim.

Sync 3.3

ford-xm
Posts: 1
Joined: Tue Jul 07, 2020 11:41 pm
Vehicle: ford focus,Ecoboost180 AT,2019

Re: 2019 Focus ST-Line APIM

Post by ford-xm » Mon Aug 24, 2020 12:29 am

If you read APIM,you must cut off battery 10 minutes after connect it again。

Hans Wynants
Posts: 3
Joined: Wed Oct 24, 2018 5:11 pm
Vehicle: transit cust 130hp '20 / fiesta MK7.5 ecoboost '15

Re: 2019 Focus ST-Line APIM

Post by Hans Wynants » Tue Aug 25, 2020 11:06 am

same problem on my transit custom 2020... Sync 3 . no apim module... also not able to get in hidden menu without forscan by holding 2 >>| buttons....

just bought new OBD ELM 327 with HS/MS switch... lot more modules pop up but stil no APIM ...

Dorian Compain
Posts: 2
Joined: Wed Sep 02, 2020 12:14 pm
Vehicle: Ford fiesta st line 2019

Re: 2019 Focus ST-Line APIM

Post by Dorian Compain » Sun Sep 06, 2020 9:27 am

Et si on as la version SYNC, et pas SYNC3, c'est possible? Car je trouve pas APIM

Post Reply