2011 MKX - Sync3 Hardware?

Car configuration discussions and experience sharing
Post Reply
cwolfey
Posts: 3
Joined: Wed Jan 15, 2020 1:33 pm
Vehicle: Edge, 2.0L EcoBost, 2019

2011 MKX - Sync3 Hardware?

Post by cwolfey » Sat Feb 15, 2020 1:51 pm

Hi All

New to Forscan, read and learned a lot so far all good I think

Lots of info on this topic...But I don't want to get wrong parts.

I have a 2011 MKX with Snyc2
I can figure out the APIM programming, but
What Hardware do I need to get for the swap?


Thanks in Advance!

cwolfey
Posts: 3
Joined: Wed Jan 15, 2020 1:33 pm
Vehicle: Edge, 2.0L EcoBost, 2019

Re: 2011 MKX - Sync3 Hardware?

Post by cwolfey » Thu May 07, 2020 11:31 am

Anyone free to lend some information?

omar302
Posts: 147
Joined: Sat Apr 16, 2016 4:50 am
Vehicle: Ford Edge, Gasoline 2.7L/335hp, 2016

Re: 2011 MKX - Sync3 Hardware?

Post by omar302 » Thu May 07, 2020 12:09 pm

See the post in FordEdge Forums. The 2012 Edge should be very similar to your 2011 MKX.

https://www.fordedgeforum.com/topic/224 ... 2-limited/

cwolfey
Posts: 3
Joined: Wed Jan 15, 2020 1:33 pm
Vehicle: Edge, 2.0L EcoBost, 2019

Re: 2011 MKX - Sync3 Hardware?

Post by cwolfey » Thu May 07, 2020 12:10 pm

Great Thanks!
I'll start there

Post Reply