Fiesta ST 150 2005 - New Yaw Sensor Calibration

Car configuration discussions and experience sharing
Post Reply
lejarton
Posts: 9
Joined: Thu May 16, 2019 7:18 am
Vehicle: Ford Fiesta ST 150 2005 (Duratec-HE I4 2.0L)

Fiesta ST 150 2005 - New Yaw Sensor Calibration

Post by lejarton » Fri Jan 24, 2020 2:03 am

HI guys,

I just received a new Yaw Sensor for my Fiesta ST. Forscan was indicating yaw sensor issues when scanned and I managed to find the part for cheap.
The ESP is still on and the ABS stays off (at least !!!)

I am about to replace the sensor with the same model. Nevertheless, I know that I will probably have to recalibrate it due to new sensor installed.

I've read some post about this procedure but they are not very clear to me regarding the steps.
As I don't want to trigger the ABS light by doing a wrong action, I was wondering if someone could help me and give a bit of of guidance on this matter so I can fix the issue for good.

I have a full licensed version of Forscan so if the funcitonnality requires a licence, that's all good.

Thank You :)

lejarton
Posts: 9
Joined: Thu May 16, 2019 7:18 am
Vehicle: Ford Fiesta ST 150 2005 (Duratec-HE I4 2.0L)

Re: Fiesta ST 150 2005 - New Yaw Sensor Calibration

Post by lejarton » Mon Jan 27, 2020 1:10 am

Hi guys,

sorry to re-up the post but is anyone familiar with this procedure for this type of vehicle ?

Thank You

Post Reply