Page 1 of 1

New Blind Spot Radar Sensor Config Help Needed

Posted: Sun Sep 01, 2019 6:36 pm
by JShirk1
Good Afternoon,

I had recently replaced the passenger side Blind Spot Radar Sensor in my '15 F150 and am having difficulties programming the new sensor to my truck. I am brand new to FORScan and any help would be greatly appreciated.

Current SODR config attached for Reference.

Thank you in advance!
Justin

Re: New Blind Spot Radar Sensor Config Help Needed

Posted: Thu Sep 05, 2019 1:44 pm
by JShirk1
Bump.

Re: New Blind Spot Radar Sensor Config Help Needed

Posted: Mon Sep 09, 2019 2:07 pm
by qualitytruck
I too am curious about solution to this issue. Hope someone who knows answers.

Re: New Blind Spot Radar Sensor Config Help Needed

Posted: Tue Sep 10, 2019 7:36 pm
by barathb
Hello,

try this:

http://www.forddiy.com/2019/01/15/how-t ... f150-2015/


SODL (Side Object Detection Left):
o 7C4-01-01 9800 0065
o 7C4-02-01 5D0A 0000 0035
o 7C4-02-02 0000 14E3
o 7C4-03-01 0B09 E3
o 7C4-04-01 5F0A 39
o 7C4-05-01 1E0A 0400 00FD
o 7C4-05-02 2541 38
o 7C4-06-01 1055 826E 80A7
o 7C4-07-01 4060 080A 199E
o 7C4-07-02 0FE3
o 7C4-08-01 3146 5445 573B – VIN # Specific
o 7C4-08-02 3106 – VIN # Specific
o 7C4-09-01 4546 3946 4B2A – VIN # Specific

o 7C4-09-02 441A – VIN # Specific

o 7C4-10-01 3133 3337 34DE – VIN # Specific

o 7C4-11-01 0046 0A23 0A5A – 2017 only
o 7C4-11-02 11EF – 2017 only

o 7C4-12-01 0603 E7- 2017 only



SODR (Side Object Detection Right):
o 7C6-01-01 9800 0067
o 7C6-02-01 5D0A 0000 0037
o 7C6-02-02 0000 14E5
o 7C6-03-01 0B09 E5
o 7C6-04-01 5F0A 3B
o 7C6-05-01 1E0A 0400 00FF
o 7C6-05-02 2541 3A
o 7C6-06-01 1055 826E 80A9
o 7C6-07-01 4060 080A 19A0
o 7C6-07-02 0FE5
o 7C6-08-01 3146 5445 573D – VIN # Specific
o 7C6-08-02 3108 – VIN # Specific
o 7C6-09-01 4546 3946 4B2C – VIN # Specific
o 7C6-09-02 441C – VIN # Specific
o 7C6-10-01 3133 3337 34E0 – VIN # Specific
o 7C6-11-01 0046 0A23 0A5C – 2017 only
o 7C6-11-02 11F1 – 2017 only

7C6-12-01 0603 E9 – 2017 only

Re: New Blind Spot Radar Sensor Config Help Needed

Posted: Mon Jan 20, 2020 12:48 am
by dangerous_sep
barathb wrote:
Tue Sep 10, 2019 7:36 pm
Hello,

try this:

http://www.forddiy.com/2019/01/15/how-t ... f150-2015/


SODL (Side Object Detection Left):
o 7C4-01-01 9800 0065
o 7C4-02-01 5D0A 0000 0035
o 7C4-02-02 0000 14E3
o 7C4-03-01 0B09 E3
o 7C4-04-01 5F0A 39
o 7C4-05-01 1E0A 0400 00FD
o 7C4-05-02 2541 38
o 7C4-06-01 1055 826E 80A7
o 7C4-07-01 4060 080A 199E
o 7C4-07-02 0FE3
o 7C4-08-01 3146 5445 573B – VIN # Specific
o 7C4-08-02 3106 – VIN # Specific
o 7C4-09-01 4546 3946 4B2A – VIN # Specific

o 7C4-09-02 441A – VIN # Specific

o 7C4-10-01 3133 3337 34DE – VIN # Specific

o 7C4-11-01 0046 0A23 0A5A – 2017 only
o 7C4-11-02 11EF – 2017 only

o 7C4-12-01 0603 E7- 2017 only



SODR (Side Object Detection Right):
o 7C6-01-01 9800 0067
o 7C6-02-01 5D0A 0000 0037
o 7C6-02-02 0000 14E5
o 7C6-03-01 0B09 E5
o 7C6-04-01 5F0A 3B
o 7C6-05-01 1E0A 0400 00FF
o 7C6-05-02 2541 3A
o 7C6-06-01 1055 826E 80A9
o 7C6-07-01 4060 080A 19A0
o 7C6-07-02 0FE5
o 7C6-08-01 3146 5445 573D – VIN # Specific
o 7C6-08-02 3108 – VIN # Specific
o 7C6-09-01 4546 3946 4B2C – VIN # Specific
o 7C6-09-02 441C – VIN # Specific
o 7C6-10-01 3133 3337 34E0 – VIN # Specific
o 7C6-11-01 0046 0A23 0A5C – 2017 only
o 7C6-11-02 11F1 – 2017 only

7C6-12-01 0603 E9 – 2017 only
I bought a used replacement from a 2017 apparently my truck is a 16 what do I do with extra values do I just "X" them out or "0"?
also this line on my Left module shows o 7C6-10-01 3133 3337 30E2 – VIN # Specific BUT since I don't have my original idk what values should go there for the SODR which currently shows o 7C6-10-01 3133 3337 32E1 – VIN # Specific

Re: New Blind Spot Radar Sensor Config Help Needed

Posted: Wed Jan 29, 2020 1:17 am
by tshergi
Hi

I have 2015 f150 my driver side taillight got damage and i gor blind spot system fault message . Now i brought used taillight from ebay with blind sport module . I plug it in blind spot fault message disappeared until i put my truck into gear. As soon as i put truck in gear message pop up and driver side blind spot detection not working . I am wondering do i need to program blind spot module with my truck vin number or its something else . I checked with forscan its showing code u0501pictures attached . Please help me how can i solve it ....

Re: New Blind Spot Radar Sensor Config Help Needed

Posted: Wed Jan 29, 2020 11:38 pm
by tshergi
Bump

Re: New Blind Spot Radar Sensor Config Help Needed

Posted: Fri Jan 31, 2020 8:11 pm
by Ptrck600
Get your data here
https://www.motorcraftservice.com/AsBuilt

Put that in the new/used module
If there are more lines of data then what you originally had from the factory. You can put all zeros in the next lines. Doubt there is a way to downgrade the firmware to match your year.

Re: New Blind Spot Radar Sensor Config Help Needed

Posted: Sat Feb 08, 2020 2:36 am
by tshergi
Thanks for help.....