Kuga (escape) tire pressure help !!

Car configuration discussions and experience sharing
Post Reply
ayahassan
Posts: 1
Joined: Fri Jul 05, 2019 9:02 pm
Vehicle: ford focus

Kuga (escape) tire pressure help !!

Post by ayahassan » Fri Jul 19, 2019 11:47 am

Can any one help me to display the pressure of each tire individually on the IPC
Top
gg1234635
Posts: 340
Joined: Sun Feb 24, 2019 9:04 pm
Vehicle: mondeo, 2.0 180, 2016

Re: Kuga (escape) tire pressure help !!

Post by gg1234635 » Fri Jul 19, 2019 6:10 pm

in the IPC Modules
line 720-04-01 xYxx-xxxx-xxxx
Change the Y value and increase it by 4. So if its 1 change to 5. If 8 change to D
Top
carlosgacu
Posts: 2
Joined: Mon May 08, 2017 9:19 pm
Vehicle: Ford Kuga Vignale 2.0 TDCI 180hp 2017

Re: Kuga (escape) tire pressure help !!

Post by carlosgacu » Sat Aug 10, 2019 9:52 pm

This change works properly?
Top
gg1234635
Posts: 340
Joined: Sun Feb 24, 2019 9:04 pm
Vehicle: mondeo, 2.0 180, 2016

Re: Kuga (escape) tire pressure help !!

Post by gg1234635 » Sat Aug 10, 2019 9:52 pm

it did on my mondeo mk5
Top
chamaruco
Posts: 14
Joined: Thu Mar 22, 2018 1:58 pm
Vehicle: ford mondeo

Re: Kuga (escape) tire pressure help !!

Post by chamaruco » Mon Nov 04, 2019 10:17 am

someone tried it on kuga/escape recently?
Top
Don Ridley
Posts: 260
Joined: Sun Apr 01, 2018 2:31 am
Vehicle: 2016 Transit Connect

Re: Kuga (escape) tire pressure help !!

Post by Don Ridley » Mon Nov 04, 2019 3:12 pm

This is not possible on the Kuga. Same problem for Focus, C Max and Transit connect. All use a similar IPC.

Check the Escape forums to be sure.
Top
Post Reply

Return to “Configuration and Programming”