2015 F150 Backup Camera Error

Car configuration discussions and experience sharing
Post Reply
Posts: 1
Joined: Thu Jul 04, 2019 12:18 am
Vehicle: ford, f150, 2015, 2.7 L

2015 F150 Backup Camera Error

Post by erteeter »

Installed the backup camera in my 2015 F150 and made the changes to FCDIM and BCM modules. When i tried to run the LIN new mod calibration it stopped at 8%, followed the prompt to cycle off and and on and the process aborted with the log "Test aborted, perform a self test to identify any diagnostic trouble codes"

not sure if it is related but i also got a warning that the "steering lock power control - on"

Checked the DTC and got the following
Code: B115E - Camera Module

Additional Fault Symptom:
- Bus Signal/Message Failures

- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC

Module: Body Control Module

Please advise
Posts: 7
Joined: Tue Jul 23, 2019 11:24 pm
Vehicle: 2015 Ford Edge

Re: 2015 F150 Backup Camera Error

Post by dmtaurus »

Did you ever figure out the remedy? My 2015 Edge gives the same error.
Post Reply