2022 F250 Halogen to OEM LED Conversion Forscan changes needed

Car configuration discussions and experience sharing
Post Reply
22Powerstrokin
Posts: 1
Joined: Wed Aug 17, 2022 4:13 am
Vehicle: 2022 Ford F-250 6.7 Powerstroke

2022 F250 Halogen to OEM LED Conversion Forscan changes needed

Post by 22Powerstrokin »

I have a 2022 F250 with factory halogen lights that I've converted to OEM Led's. I can't get the High beams to work (toggling between high and lows does nothing) I'm wondering if I'm missing a forscan setting somewhere keeping them from coming on. Fogs, DRL, Low Beams, Blinkers, and Hazards all work perfect. I bought a conversion wiring harness off of Ebay and ran the fives wires to my BCM. Below are the BCM pin locations and Forscan changes that came with the harness I used. Any help is appreciated! I've spent the last few days researching and going thru forums with no luck.

BCM Pin locations:
6, 40, 15, 17, and 36

Forscan Changes:
726-37-02-xxx0-x0xx-xxxx
726-38-01-x1xx-xxxx-xxxx
726-38-02-xxxx-xxxx-x2xx
726-40-02-x0x1-xxxx-xxxx
726-41-01-xxx0-xxxx-xxxx
726-41-02-xxx0-xxxx-x1xx
726-42-01-x3x3-xxxx-x5xx
726-42-02-x5x2-x2xx-xxxx
726-48-02-xxxx-xxxx-x1xx
726-65-02-xxxx-x1xx-xxxx
726-67-01-E39D-CFx1-xxxx
726-74-02-x0xx-xxxx-xxxx
Post Reply