2020 transit connect auto lock at speed

Car configuration discussions and experience sharing
MoJo88
Posts: 53
Joined: Mon May 18, 2020 12:18 pm
Vehicle: Mondeo Vignale 210ps 2017

Re: 2020 transit connect auto lock at speed

Post by MoJo88 » Wed Oct 07, 2020 9:41 pm

There is only one when it comes FORScan. OBDLink EX. Recommended by FORScan and made pretty much specifically for them.

There are some other variants of OBDLink like a bluetooth version and others, but I never bothered to look into them. I just know what works and that's the original.

Don Ridley
Posts: 299
Joined: Sun Apr 01, 2018 2:31 am
Vehicle: 2016 Transit Connect

Re: 2020 transit connect auto lock at speed

Post by Don Ridley » Wed Oct 07, 2020 10:47 pm

OBDLink MX. Bluetooth allows you to always stay connected to your vehicle to read status of signals using the phone app.

matt-tom
Posts: 15
Joined: Wed May 31, 2017 3:35 pm
Vehicle: trnsit connect 1.5 2017

Re: 2020 transit connect auto lock at speed

Post by matt-tom » Thu Oct 08, 2020 6:02 am

Awesome, thanks guys will order one and give it a try, just looked at them and they seem to be better than what I currently have as I have a manual toggle switch on my current cable 👍🏼👍🏼

matt-tom
Posts: 15
Joined: Wed May 31, 2017 3:35 pm
Vehicle: trnsit connect 1.5 2017

Re: 2020 transit connect auto lock at speed

Post by matt-tom » Tue Oct 13, 2020 5:46 pm

I received my obdlink ex cable today but I get the same error when writing to the Bcmii

It gets to 29% and comes up with the error service procedure has been interrupted

To add I tried to enable global close and get the same error

matt-tom
Posts: 15
Joined: Wed May 31, 2017 3:35 pm
Vehicle: trnsit connect 1.5 2017

Re: 2020 transit connect auto lock at speed

Post by matt-tom » Sun Oct 18, 2020 9:14 am

i have now updated to the latest version 2.3.36 and i still get the same error writing to the module, it stops at 29% and says service interrupted. has anyone rectified this previously ?

thanks

fcoplo
Posts: 102
Joined: Wed Jul 15, 2020 9:01 pm
Vehicle: Ford Ecosport SE MY2018 1.5 Gas AT6 (Brazil)

Re: 2020 transit connect auto lock at speed

Post by fcoplo » Sun Oct 18, 2020 2:10 pm

Check if you car has DDM and PDM modules (Door modules), in my understading how the things works, I think that bdycm sent a message to them "ey, we are running, close the doors".
If you have those modules, take a look to the options inside of them related to auto lock.
If not, sent debug info to Forscan to check why process is being interrupted.
R

matt-tom
Posts: 15
Joined: Wed May 31, 2017 3:35 pm
Vehicle: trnsit connect 1.5 2017

Re: 2020 transit connect auto lock at speed

Post by matt-tom » Mon Oct 19, 2020 3:39 pm

Thanks, I will check out the door modules and will revert once I have had a look 👍🏼

Post Reply