Fiesta MK8 / 2018 Rain Sensor

Car configuration discussions and experience sharing
BlueRazer
Posts: 8
Joined: Mon Aug 12, 2019 10:31 am
Vehicle: Ford Kuga, 1.5 Ecoboost, 150 PS, 2017

Fiesta MK8 / 2018 Rain Sensor

Post by BlueRazer » Mon Jun 29, 2020 9:03 am

Hello everybody,
I replaced the light sensor on my Fiesta with the rain / light sensor.
In Forscan, in addition to the setting in the IPC (rain sensor), I found other settings in the BdyCM module and simply activated them:
- Rain Light Sensor
- Rain Sensing Wipe
(direct config)
In the BC menu I activated the rain sensor and set the lever to level 1.

The wiper interval is then switched off, but the automatic does not work.
The automatic light function works perfectly.
What have I overlooked?

Does anyone have any ideas?
Ford Kuga Titanium 2017, 1.5 Ecoboost
Ford Fiesta 2018, 1.1

roylion15
Posts: 179
Joined: Tue Aug 14, 2018 11:35 am
Vehicle: Fiesta ST, 1500, Ecoboost, 200 PK, 2019 model

Re: Fiesta MK8 / 2018 Rain Sensor

Post by roylion15 » Mon Jun 29, 2020 2:42 pm

Hello
Are you sure that you have a rain/light sensor , a part number please ?
Do you activate RSW in the wipers menu ?

Verify also "Rain sensor" activation in SCCM

724-03-01 first block
without RS : 2000 > with RS :6000
No support in PM without invitation, please !

neutron2k
Posts: 35
Joined: Wed May 27, 2020 3:14 pm
Vehicle: Ford Focus MK4 1.0 125 Ecoboost 2018

Re: Fiesta MK8 / 2018 Rain Sensor

Post by neutron2k » Mon Jun 29, 2020 3:09 pm

The part number you need for the rain sensor is G3GT-17D547-AD

-BB is the light only one.

HELLA supply rain sensors if you need one, but you will need to purchase HELLA #6PW012008711 which is the G3GT-17D547-AD rain and light sensor. HELLA however list this part as for a Ford Transit and NOT a Fiesta/Focus.

I recently did this mod to my MK4 Focus ST-Line without issues. Only place I need to enable it was the IPC. It automatically activated itself under the BCM some how.

To check your sensor, (if its from another Ford), the -AD or -BB will be engraved on the metal bracket. You will also know if you have the BB light only version as it will have a BULB icon and the word 'Only' printed above the connector.

BlueRazer
Posts: 8
Joined: Mon Aug 12, 2019 10:31 am
Vehicle: Ford Kuga, 1.5 Ecoboost, 150 PS, 2017

Re: Fiesta MK8 / 2018 Rain Sensor

Post by BlueRazer » Mon Jun 29, 2020 3:27 pm

roylion15 wrote:
Mon Jun 29, 2020 2:42 pm
Hello
Are you sure that you have a rain/light sensor , a part number please ?
Do you activate RSW in the wipers menu ?

Verify also "Rain sensor" activation in SCCM

724-03-01 first block
without RS : 2000 > with RS :6000
Hello,
RSW is activated in the wiper menu.

The part number of the rain sensor is:
Hella 6PW 013 005-701
Ford OEM numbers:
FORD - OE-2088812
FORD - OE-2107337
FORD - OE-G3GT 17D547 BA
FORD - OE-G3GT 17D547BB

The settings in the SCCM, see pictures
The attachment SCCM.JPG is no longer available
The attachment SCCM.JPG is no longer available
Attachments
SCCM.JPG
SCCM.JPG (110.42 KiB) Viewed 228 times
Ford Kuga Titanium 2017, 1.5 Ecoboost
Ford Fiesta 2018, 1.1

BlueRazer
Posts: 8
Joined: Mon Aug 12, 2019 10:31 am
Vehicle: Ford Kuga, 1.5 Ecoboost, 150 PS, 2017

Re: Fiesta MK8 / 2018 Rain Sensor

Post by BlueRazer » Mon Jun 29, 2020 3:30 pm

neutron2k wrote:
Mon Jun 29, 2020 3:09 pm
The part number you need for the rain sensor is G3GT-17D547-AD

-BB is the light only one.

I specified HSN / TSN when searching.
So do I actually have the wrong sensor for the Fiesta?
Ford Kuga Titanium 2017, 1.5 Ecoboost
Ford Fiesta 2018, 1.1

BlueRazer
Posts: 8
Joined: Mon Aug 12, 2019 10:31 am
Vehicle: Ford Kuga, 1.5 Ecoboost, 150 PS, 2017

Re: Fiesta MK8 / 2018 Rain Sensor

Post by BlueRazer » Mon Jun 29, 2020 3:34 pm

Yes, this value is entered:

724-03-01 first block
without RS : 2000
Ford Kuga Titanium 2017, 1.5 Ecoboost
Ford Fiesta 2018, 1.1

neutron2k
Posts: 35
Joined: Wed May 27, 2020 3:14 pm
Vehicle: Ford Focus MK4 1.0 125 Ecoboost 2018

Re: Fiesta MK8 / 2018 Rain Sensor

Post by neutron2k » Mon Jun 29, 2020 3:55 pm

BlueRazer wrote:
Mon Jun 29, 2020 3:30 pm
neutron2k wrote:
Mon Jun 29, 2020 3:09 pm
The part number you need for the rain sensor is G3GT-17D547-AD

-BB is the light only one.

I specified HSN / TSN when searching.
So do I actually have the wrong sensor for the Fiesta?
Yes mate. hellas compaibility list is fubar.

You need the part i mentioned previously - 6PW012008711

BlueRazer
Posts: 8
Joined: Mon Aug 12, 2019 10:31 am
Vehicle: Ford Kuga, 1.5 Ecoboost, 150 PS, 2017

Re: Fiesta MK8 / 2018 Rain Sensor

Post by BlueRazer » Mon Jun 29, 2020 4:00 pm

OK,
thank you for your support.
I now order the ... AD sensor and report as soon as it is installed.
Ford Kuga Titanium 2017, 1.5 Ecoboost
Ford Fiesta 2018, 1.1

roylion15
Posts: 179
Joined: Tue Aug 14, 2018 11:35 am
Vehicle: Fiesta ST, 1500, Ecoboost, 200 PK, 2019 model

Re: Fiesta MK8 / 2018 Rain Sensor

Post by roylion15 » Tue Jun 30, 2020 9:05 am

Also
The part number in FORD OEM is the AD ,

BB is light only... don't buy HELLA sensor, buy OEM part.

https://www.befr.ebay.be/itm/Original-F ... 4486118409

The value must be set on "6000" in SCCM.
No support in PM without invitation, please !

smartd00d
Posts: 2
Joined: Wed May 17, 2017 8:59 pm
Vehicle: Ford Fiesta 1.0 Ecoboost 2017

Re: Fiesta MK8 / 2018 Rain Sensor

Post by smartd00d » Tue Jun 30, 2020 10:48 pm

Hi, do the sensors come with the pad and how do you apply it?
Thanks!

Post Reply