This means you should check if you PCM has latest firmware. This is actually 2 tasks:mx-user wrote: 4. Errors - works
Remark: dtc P2458-21 possible cause -"check the PCM for the latest calibration" what does that mean?
- check if the calibration is latest one, if not - find latest one
- if newer ones is available, reflash PCM with new one.
Ford IDS (dealership scanner) can do both tasks. FORScan cannot do any of them yet. First one will be added in one of nearest version, as for the second one, we are not sure when it will be added.
These PIDs, if available may be named EGT and/or CATEMP 11, CATEMP 12, CATEMP 21 etc.mx-user wrote: "Check that the pre and the post-catalyst sensors are operating correctly" here i know only the PID DPF Temperature.
What are the PID names of the pre and the post-catalyst sensors?
When you added some PIDs, you should tap on back button to return to the previous screen. The profile will be saved at the moment of transition.mx-user wrote: 5. Table and Dashboard.
Her I have obvious a problem of understanding.
If I select e.g. PCM and than CANVP , how I confirm my selection?
Thanks in advance for help to Item 4 and 5