PDM,ddm module ubdated

Testing new functions
Post Reply
marekrbk
Posts: 13
Joined: Wed Nov 22, 2017 7:35 pm
Vehicle: mondeo,qyba1e,1.8,132kw,41nm,2007 chiptunning
Location: Slovakia

PDM,ddm module ubdated

Post by marekrbk »

Mondeo mk4 1.8tdci 2007 92kw
Forscan 2.4.0 test20190403
ImageImage

why this? after update code: u0300
is a solution?
:idea:
Attachments
IMG_20190506_111530.jpg
IMG_20190506_111530.jpg (283.91 KiB) Viewed 7257 times
IMG_20190506_105429.jpg
IMG_20190506_105429.jpg (301.02 KiB) Viewed 7257 times
nurex
Posts: 2
Joined: Wed Jun 13, 2018 6:16 pm
Vehicle: Ford Mondeo MK4

Re: PDM,ddm module ubdated

Post by nurex »

I have the same problem.

Is there a solution???



IMG_20191110_132710.jpg
IMG_20191110_132710.jpg (159.57 KiB) Viewed 6659 times
IMG_20191110_132201.jpg
IMG_20191110_132201.jpg (165.98 KiB) Viewed 6659 times
IMG_20191109_115138.jpg
IMG_20191109_115138.jpg (262.6 KiB) Viewed 6659 times
Ptrck600
Posts: 114
Joined: Mon Mar 27, 2017 3:03 pm
Vehicle: F150/3.5/2016

Re: PDM,ddm module ubdated

Post by Ptrck600 »

marekrbk wrote:
Mon May 06, 2019 1:01 pm
Mondeo mk4 1.8tdci 2007 92kw
Forscan 2.4.0 test20190403
ImageImage

why this? after update code: u0300
is a solution?
:idea:
Try what the troubleshooting says.

Run CCMii sensor alignment service function
marekrbk
Posts: 13
Joined: Wed Nov 22, 2017 7:35 pm
Vehicle: mondeo,qyba1e,1.8,132kw,41nm,2007 chiptunning
Location: Slovakia

Re: PDM,ddm module ubdated

Post by marekrbk »

such a feature is not supported forscan
marekrbk
Posts: 13
Joined: Wed Nov 22, 2017 7:35 pm
Vehicle: mondeo,qyba1e,1.8,132kw,41nm,2007 chiptunning
Location: Slovakia

Re: PDM,ddm module ubdated

Post by marekrbk »

I updated the modules with original calibrations. all without mistakes. using ucds cable
Attachments
Snímka obrazovky (9).jpg
Snímka obrazovky (9).jpg (22.62 KiB) Viewed 5849 times
89098707_635363810581374_554997546594861056_n.jpg
89098707_635363810581374_554997546594861056_n.jpg (66.53 KiB) Viewed 5864 times
marekrbk
Posts: 13
Joined: Wed Nov 22, 2017 7:35 pm
Vehicle: mondeo,qyba1e,1.8,132kw,41nm,2007 chiptunning
Location: Slovakia

Re: PDM,ddm module ubdated

Post by marekrbk »

return the original calibration,error u0300 removed.
folding rearview mirrors the function expires. if you want the function again, update only DDM
danczx7841
Posts: 2
Joined: Sun Nov 29, 2020 2:45 pm
Vehicle: mondeo mk3 125 bhp 2009

Re: PDM,ddm module ubdated

Post by danczx7841 »

marekrbk wrote:
Thu Mar 05, 2020 6:01 pm
return the original calibration,error u0300 removed.
folding rearview mirrors the function expires. if you want the function again, update only DDM
Hi have you got the files to download
danczx7841
Posts: 2
Joined: Sun Nov 29, 2020 2:45 pm
Vehicle: mondeo mk3 125 bhp 2009

Re: PDM,ddm module ubdated

Post by danczx7841 »

marekrbk wrote:
Thu Mar 05, 2020 6:01 pm
return the original calibration,error u0300 removed.
folding rearview mirrors the function expires. if you want the function again, update only DDM
Hi have you got the files to download
mtech
Posts: 6
Joined: Sun Jul 31, 2016 4:47 pm
Vehicle: 2018 Ford F-150

Re: PDM,ddm module ubdated

Post by mtech »

I had some DTCs after flashing new firmware to PDM. The PDM was inop after flash, no normal functions.

The flash was successful, but was getting a few DTCs on the PDM, including 'Missing Calibration'. The PDM was not responding correctly, as I could not activate the power fold mirrors on the passenger side.

What I found is that the As Built configuration went to some default state after the firmware flash. I restored from a backup I made earlier and then the PDM started to work normally with the new firmware. DTCs went away.
nurex
Posts: 2
Joined: Wed Jun 13, 2018 6:16 pm
Vehicle: Ford Mondeo MK4

Re: PDM,ddm module ubdated

Post by nurex »

I have the solution for U0300.

If you update DDM and PDM to software with the last letter E or F, then the rear modules must have the same last letter. After that, the U0300 DTC is gone

Screenshot_2021-12-19-15-19-41-54_c0dc27f5c07cb0fb3541d6073dfd6932.jpg
Screenshot_2021-12-19-15-19-41-54_c0dc27f5c07cb0fb3541d6073dfd6932.jpg (455.35 KiB) Viewed 2757 times
Post Reply