2019 ford f250 auto fold mirrors

Testing new functions
Post Reply
glendar100
Posts: 4
Joined: Thu Jan 10, 2019 6:49 pm
Vehicle: 2019 ford f250 King Ranch Diesel
Location: Illinois

2019 ford f250 auto fold mirrors

Post by glendar100 » Fri Feb 08, 2019 3:26 pm

Anyone foud out if you can reprogram the mirrors on a 2019 f250 to auto fold with motor or of off? have folding mirrors but not auto fold but ford said they can not program it , or dont know how to?

orangeorange
Posts: 1
Joined: Fri Feb 08, 2019 2:21 am
Vehicle: ford 6.7 diesel 440 hp 2019

Re: 2019 ford f250 auto fold mirrors

Post by orangeorange » Sat Feb 09, 2019 1:16 pm

Any solution on this? I tried pluging my ELMcongig usb adapter and only get 6-7 modules to program but not yhe modules that control the autofold mirror option .Is this normal for the 2019 model superduty?any help much appreciated .

jeff6146
Posts: 22
Joined: Mon Feb 12, 2018 2:11 pm
Vehicle: F350 dually lariat 2015 6.7L turbo 4X4
Location: West Texas

Re: 2019 ford f250 auto fold mirrors

Post by jeff6146 » Fri Feb 15, 2019 2:52 pm

Which module controls the auto fold option, I thought it was in the BCM.

glendar100
Posts: 4
Joined: Thu Jan 10, 2019 6:49 pm
Vehicle: 2019 ford f250 King Ranch Diesel
Location: Illinois

Re: 2019 ford f250 auto fold mirrors

Post by glendar100 » Fri Feb 22, 2019 1:28 pm

I thought it was ddm

User avatar
Andyfocus
Posts: 415
Joined: Sun Sep 16, 2018 1:35 pm
Vehicle: ford focus 1.0 ecoboost (100ps) 2017

Re: 2019 ford f250 auto fold mirrors

Post by Andyfocus » Fri Feb 22, 2019 6:50 pm

have you tryied in the ipc and bcm centrel config options (make sure your in engineering mode with all hidden options shown ) , may be in thier ?.
i am the same as you just a forscan user still learning .

glendar100
Posts: 4
Joined: Thu Jan 10, 2019 6:49 pm
Vehicle: 2019 ford f250 King Ranch Diesel
Location: Illinois

Re: 2019 ford f250 auto fold mirrors

Post by glendar100 » Wed Feb 27, 2019 11:11 pm

It is ddm and pdm for auto fold mirrors. As for only getting a few it should ask you to switch the elmconfig to hs I believe then it get more.
You also have to switch two wires on both mirrors. I have done most of them but not the mirrors yet the def % works also the temp. And the police and the double honk work. Have to look tonight and see if Bambi mode works.
You can put a gauge in the screen for the DEF like a gas gauge as to get prescient you have to go to the setting to read it after you have it in forscan.
2019 f250 king ranch 4x4 6.7 cc

Post Reply