Testing firmware update function for Ford modules

Testing new functions
mschumiv
Posts: 15
Joined: Thu Oct 19, 2017 9:12 am
Vehicle: Ford Focus MK4 1.5L 88kw diesel 2019

Re: Testing firmware update function for Ford modules

Post by mschumiv » Sun Oct 13, 2019 6:25 am

LaForge wrote:
Sun Oct 13, 2019 5:06 am
mschumiv wrote:
Wed Oct 02, 2019 8:19 pm
Anyone with a mk4 here?
I flashed the DDM and RCM module, all went well but some functionality changed. Since i wasn't able to flash the PDM module due to some service interrupted error, the windows on the left behave differently than the ones on the right, when using Global close. The left ones close fast at first and on the last 5 to 10 cm, really slow.
I've also lost some selective unlocking features like the ability to unlock only the trunk while the doors remained locked (using the keyless entry feature). Now all doors unlock when trying to open the trunk.
I didn't mess with the anything else but somehow the steering seems to be affected, the level of electrical assistance seems lower, and requires some little extra force to steer.
Dear friend,
Do you have done a full recalibration of your doirs?
Before that you have to reset your module to default and then do a relearning of all desired and needed features.
With my mk3 i ve got similar issues after reflashing the ddm and pdm module

Best regards
Karsten
I've downgraded back to original firmware and all is ok.
I still can't flash the PDM module.

gravey
Posts: 6
Joined: Sat Oct 12, 2019 3:00 pm
Vehicle: Kuga, Euro 6 TDCI 2.0, 2016

Re: Testing firmware update function for Ford modules

Post by gravey » Sun Oct 13, 2019 9:54 am

Hi.
Any chance I can get this to try on a 2016 kuga?
Thanks

districtluke
Posts: 1
Joined: Thu May 25, 2017 3:51 pm
Vehicle: MONDEO TITANIUM X

Re: Testing firmware update function for Ford modules

Post by districtluke » Mon Oct 14, 2019 9:42 am

I would like to test 2.4, working on vbf uploads to sync 3 to enable 3.4 installation with dab logos etc. Working on a focus mk3 pre facelift with els27, elm27, Ucds cable and ids access if needed.
Many thanks

jiraines
Posts: 1
Joined: Mon Aug 13, 2018 6:58 pm
Vehicle: 2014 Ford Fusion SE 1.6L

Re: Testing firmware update function for Ford modules

Post by jiraines » Mon Oct 14, 2019 5:16 pm

I'd like to test this functionality if you still need testers. I have a 2014 Fusion 1.6L with Manual Transmission

davidtanis
Posts: 2
Joined: Tue Nov 14, 2017 6:08 pm
Vehicle: Ford Fusion 2.5 SE 2015

Re: Testing firmware update function for Ford modules

Post by davidtanis » Tue Oct 15, 2019 12:31 am

I'm now in this group, (thanks for the add) is there a Facebook page?

rich935
Posts: 14
Joined: Sat Oct 12, 2019 11:45 pm
Vehicle: Ford Focus SE 2.0

Re: Testing firmware update function for Ford modules

Post by rich935 » Tue Oct 15, 2019 4:58 am

Is there any estimated release date for this new version of FORScan?

wegerstaffer
Posts: 2
Joined: Sat Jun 24, 2017 2:58 pm
Vehicle: Ford Fusion, 1.5L, 2016

Re: Testing firmware update function for Ford modules

Post by wegerstaffer » Thu Oct 17, 2019 8:25 pm

Looking to upgrade calibration files on Ford Sync3 APIM modules. Requesting Beta access.

Mine
Posts: 10
Joined: Thu Feb 01, 2018 12:41 pm
Vehicle: Mustang, 5,0, 421 PS, 2017

Re: Testing firmware update function for Ford modules

Post by Mine » Tue Oct 22, 2019 10:08 pm

Hi FORScan Team and Admins,

i want to be a beta tester for software programming too.
Can you send me the link for 2.4?

Best regards from germany
Last edited by Mine on Thu Oct 24, 2019 8:35 am, edited 2 times in total.

fastfinger
Posts: 2
Joined: Mon Oct 29, 2018 3:47 pm
Vehicle: Ford Focus 1.0 ecoboost 125 hp

Re: Testing firmware update function for Ford modules

Post by fastfinger » Wed Oct 23, 2019 1:01 pm

Hi there,
can I have please the link to download version 2.4?
Tks vm

AGFazio
Posts: 2
Joined: Wed Aug 22, 2018 3:17 pm
Vehicle: 2018 Ford f250 XLT 6.2l

Re: Testing firmware update function for Ford modules

Post by AGFazio » Wed Oct 23, 2019 7:21 pm

I would like to test 2.4, working on vbf uploads to sync 3 to enable 3.4.

Thank You

Post Reply