Testing firmware update function for Ford modules

Testing new functions
Jeffb436
Posts: 1
Joined: Fri Feb 09, 2018 8:05 pm
Vehicle: 2008 Ford focus st225 2.5 turbo

Re: Testing firmware update function for Ford modules

Post by Jeffb436 »

Hi guys is it possible to get a copy of the 2.4 beta please tia
ALJABALI
Posts: 3
Joined: Sun May 12, 2019 11:56 pm
Vehicle: ford expedition EcoBoost Turbocharged 2018

Re: Testing firmware update function for Ford modules

Post by ALJABALI »

Hi guys is it possible to get a copy of the 2.4 beta please...
NiceMan
Posts: 7
Joined: Tue Jun 11, 2019 8:36 am
Vehicle: Ford Mondeo ecoboost 203hp 2011
Location: Helsinki
Contact:

Re: Testing firmware update function for Ford modules

Post by NiceMan »

typack wrote:
Mon Jan 18, 2021 1:50 pm
metroplex wrote:
Wed Jan 13, 2021 12:33 pm
What devices are you using to flash the modules? Forscan said my obdlink mx wasn't good enough.
els27 v4 from els27.ru
How its work whit update ? I have same but newer test update firware yet... Mondeo ecoboost 2.0 2011
typack
Posts: 10
Joined: Wed Oct 21, 2020 3:49 pm
Vehicle: Экобуст 1.5 ff3

Re: Testing firmware update function for Ford modules

Post by typack »

NiceMan wrote:
Sat Feb 20, 2021 1:09 pm

How its work whit update ? I have same but newer test update firware yet... Mondeo ecoboost 2.0 2011
I update my ipc withot any problem. 6 Mb about 40 minutes
stelian77
Posts: 2
Joined: Thu Jun 25, 2020 4:34 pm
Vehicle: ford mondeo 2.0 tdi 2015 150 hp
Location: España
Contact:

Re: Testing firmware update function for Ford modules

Post by stelian77 »

sirino wrote:
Tue Feb 11, 2020 3:14 pm
Hello.
I would like to be a 2.4.0 release tester.
I have a Ford Mondeo MY2016 and would like to make available module updates.
stelian77
Posts: 2
Joined: Thu Jun 25, 2020 4:34 pm
Vehicle: ford mondeo 2.0 tdi 2015 150 hp
Location: España
Contact:

Re: Testing firmware update function for Ford modules

Post by stelian77 »

Pm beta testing please
User avatar
fordsmax471
Posts: 904
Joined: Mon Aug 07, 2017 5:29 pm
Vehicle: Ford S-Max 2.0 TDCi 2017 PowerShift

Re: Testing firmware update function for Ford modules

Post by fordsmax471 »

lenko wrote:
Sun Feb 07, 2021 4:13 pm
I updated most of my modules with newer strategies and as they were being updated it showed the new strategies being programmed in, but on downloading the module information after this, only three showed the new update. The RTGM, the VDM and the SCCM. I'm just wondering why the others don't show being updated as they obviously were shown updating with successful completion . Is there anything else I should be doing? A number of the modules showed more than one update in green and all went through the programming successfully. The numbers were all the same but the last two alphabets were progressively increased.
create new car profile after updating
FORScan 2.4.3/UCDS 4/Elitebook G6/Win10 pro
lenko
Posts: 601
Joined: Sat Dec 24, 2016 6:40 pm
Vehicle: 2015 Lincoln MKC, 2006 Mustang GT, Saleen 530 HP

Re: Testing firmware update function for Ford modules

Post by lenko »

I thought I did that. I'll recheck it again. In any event the Lincoln folding mirrors stopped working after updating the DDM and PDM so I reverted back to factor settings and got them to working properly again. Some updates Forscan downloads don't seem to be the correct ones.
colmoschin94
Posts: 20
Joined: Fri Jul 10, 2020 10:22 am
Vehicle: fiesta 1.5 tdci

Re: Testing firmware update function for Ford modules

Post by colmoschin94 »

Hi,
today I tried to flash the pcm of my 2016' fiesta 1.5 tdci,
I'm using a VCX Nano adapter and I'm relatively familiar with the Firmware Update Procedure (I've updated successfully a few modules in the past), however when it comes to the PCM update both Forscan and IDS fail to update, forscan in particular fails right at the start of the SBL flash without reporting the failure reason.
I'm attaching the log files, do you guys have any suggestions on how to try to make the update successful?

Thanks!
Attachments
FORScan.log
(48.64 KiB) Downloaded 81 times
dump.bin
(80.96 KiB) Downloaded 39 times
cheevish
Posts: 1
Joined: Thu Feb 13, 2020 5:54 am
Vehicle: ford mustang .2.3 , ecoboost , 2015

Re: Testing firmware update function for Ford modules

Post by cheevish »

hi, please send me the link for 4.2
Post Reply