Page 1 of 4

PATS for 2010 FG Falcon

Posted: Mon Sep 25, 2017 2:29 am
by g6e_turbo
is there any options for PATS on fg, i want to put a different IPC in and it requires PATS to program

Re: PATS for 2010 FG Falcon

Posted: Sat Sep 30, 2017 10:51 am
by KRL-94
you will need the hs/ms can switch unit to scan/program on an fg falcon. with that, you should be able to program the ipc. I cant really give anymore info on this tho as I haven't had much experience with fg falcons.

Re: PATS for 2010 FG Falcon

Posted: Thu Oct 05, 2017 10:35 am
by g6e_turbo
yeah i already have the switch to go from HS CAN to MS

Re: PATS for 2010 FG Falcon

Posted: Thu Jan 04, 2018 12:54 pm
by gmau69
Have you found a way to do PATS programming on FG Falcons?
Thanks

Re: PATS for 2010 FG Falcon

Posted: Sun Jan 07, 2018 11:20 pm
by crazy181
I have a 2008 FG that i would like to be able to program keys for but so far have not been able to find a way.
When i get a chance i will be sending my logs to the FORscan guys, hopefully support can be added for the FG range. ;)

Re: PATS for 2010 FG Falcon

Posted: Mon Jan 08, 2018 10:08 am
by gmau69
crazy181 wrote:I have a 2008 FG that i would like to be able to program keys for but so far have not been able to find a way.
When i get a chance i will be sending my logs to the FORscan guys, hopefully support can be added for the FG range. ;)
Have you tried to program a ICC unit on FG cars?
Does it work the same way like BA/BF where we just select ACM configure?

Re: PATS for 2010 FG Falcon

Posted: Tue Jul 17, 2018 1:21 pm
by Rustypick
Any updates on this?

I have been unable to bring up pats for a 2008 FG Falcon

Re: PATS for 2010 FG Falcon

Posted: Thu Jul 19, 2018 12:39 am
by f-wolf

Re: PATS for 2010 FG Falcon

Posted: Mon Jan 28, 2019 9:08 am
by oldtinfords
The FORScan team have advised that key programming on FG mk1 has been added. They need testers to use & provide feedback. Once they are satisfied with the feedback they will start working on FG MK2

Re: PATS for 2010 FG Falcon

Posted: Wed Feb 13, 2019 10:45 pm
by gmau69
Hi, yesterday I tried to perform PATS reset on a 2009 FG and it did not work.
It says I need an ELM (OBD) adapter that could be controlled/switched ( HS-CAN/MS-CAN) by Forscan not manually.
I use ELM with the switch for HS/MS.
Any advice please?
Thanks