PATS for 2010 FG Falcon
PATS for 2010 FG Falcon
is there any options for PATS on fg, i want to put a different IPC in and it requires PATS to program
Re: PATS for 2010 FG Falcon
you will need the hs/ms can switch unit to scan/program on an fg falcon. with that, you should be able to program the ipc. I cant really give anymore info on this tho as I haven't had much experience with fg falcons.
Re: PATS for 2010 FG Falcon
yeah i already have the switch to go from HS CAN to MS
Re: PATS for 2010 FG Falcon
Have you found a way to do PATS programming on FG Falcons?
Thanks
Thanks
Re: PATS for 2010 FG Falcon
I have a 2008 FG that i would like to be able to program keys for but so far have not been able to find a way.
When i get a chance i will be sending my logs to the FORscan guys, hopefully support can be added for the FG range.
When i get a chance i will be sending my logs to the FORscan guys, hopefully support can be added for the FG range.

Re: PATS for 2010 FG Falcon
Have you tried to program a ICC unit on FG cars?crazy181 wrote:I have a 2008 FG that i would like to be able to program keys for but so far have not been able to find a way.
When i get a chance i will be sending my logs to the FORscan guys, hopefully support can be added for the FG range.
Does it work the same way like BA/BF where we just select ACM configure?
Re: PATS for 2010 FG Falcon
Any updates on this?
I have been unable to bring up pats for a 2008 FG Falcon
I have been unable to bring up pats for a 2008 FG Falcon
-
- Posts: 21
- Joined: Sat Mar 18, 2017 2:51 am
- Vehicle: BFII XR8 boss 260 5.4l 2006....BFII XR6T 2007....
Re: PATS for 2010 FG Falcon
The FORScan team have advised that key programming on FG mk1 has been added. They need testers to use & provide feedback. Once they are satisfied with the feedback they will start working on FG MK2
Re: PATS for 2010 FG Falcon
Hi, yesterday I tried to perform PATS reset on a 2009 FG and it did not work.
It says I need an ELM (OBD) adapter that could be controlled/switched ( HS-CAN/MS-CAN) by Forscan not manually.
I use ELM with the switch for HS/MS.
Any advice please?
Thanks
It says I need an ELM (OBD) adapter that could be controlled/switched ( HS-CAN/MS-CAN) by Forscan not manually.
I use ELM with the switch for HS/MS.
Any advice please?
Thanks