Page 4 of 5

Re: Method to disable auto stop / start found

Posted: Thu Jan 09, 2020 9:00 am
by X_Kris_X
semiho wrote:
Thu Oct 03, 2019 9:55 pm
Focus-MK4 wrote:
Fri May 10, 2019 3:58 pm
I wanted to try it on the new Focus 2019 but the BdyCM hasn´t the 726-48, it´s only up to 726-27
Anyone an idea?
BCM’s are quite different, so configuration byte of S&S is also different for Focus/Kuga/Escape/C-Max etc.
does anyone found the configuration byte for those models? I have the same on EcoSport (it´s only up to 726-27) :/

Re: Method to disable auto stop / start found

Posted: Sun Feb 09, 2020 3:29 pm
by ted22
Any luck finding this anyone??? same on the Lincoln MKC... only goes up to 27.

Re: Method to disable auto stop / start found

Posted: Wed Feb 26, 2020 12:56 pm
by Baltic
Hello all!!
Must register to here and buy Forscan.
Is this method still valid and what those XXX are in coding? Bit confused :shock:

Transit Custom

Re: Method to disable auto stop / start found

Posted: Wed Feb 26, 2020 2:24 pm
by lenko
Baltic wrote:
Wed Feb 26, 2020 12:56 pm
Hello all!!
Must register to here and buy Forscan.
Is this method still valid and what those XXX are in coding? Bit confused :shock:

Transit Custom
Still available and the X's are the positions of letters or numbers you don't touch when programming.

Re: Method to disable auto stop / start found

Posted: Thu Feb 27, 2020 6:21 am
by Baltic
Ok now I get it, thanks!
Will try this when my cable arrives.

Re: Method to disable auto stop / start found

Posted: Thu Feb 27, 2020 7:10 am
by fordsmax471
don't forget to backup the modules when the cable arrives ;)
https://www.youtube.com/watch?v=4Opz1oa2_n0

Re: Method to disable auto stop / start found

Posted: Mon Mar 02, 2020 12:59 am
by arrgh
Same here, with Focus Mk4 and Fiesta ST Mk8, BdyCM doesn't have the address mentioned, it goes only up to 726-27. BTW, I've successfully disabled the menu in the IPC, the address mentioned is present and working, menu in IPC has gone. Also tried to set the start/stop bit in APIM, but nothing changes, the start/stop is always enabled. Anyone have another BdyCM address to test? If yes, I can test it.

Re: Method to disable auto stop / start found

Posted: Wed Mar 04, 2020 2:37 pm
by Fresh_1
Airborne_Ape wrote:
Tue Mar 07, 2017 7:17 am

BCM 726-48-02 x0xx xxxx xx
I tried it on a 2019 F-150 XLT and it appears to be working. Anyone know what this actually changed?

Re: Method to disable auto stop / start found

Posted: Thu Mar 05, 2020 3:48 am
by f-wolf
Fresh_1 wrote:
Wed Mar 04, 2020 2:37 pm
Airborne_Ape wrote:
Tue Mar 07, 2017 7:17 am

BCM 726-48-02 x0xx xxxx xx
I tried it on a 2019 F-150 XLT and it appears to be working. Anyone know what this actually changed?
Engine stop.jpg
Engine stop.jpg (22.68 KiB) Viewed 546 times

Re: Method to disable auto stop / start found

Posted: Thu Mar 05, 2020 3:20 pm
by jejuda
Easy, Works on 2018 F-150 XL

FCIM Configuration Module

"Start/Stop Button Disable" Enable to Disable

IPC Configuration Module

"Auto Engine Shutdown with Memory" Enable to Disable

BdyCM As Built Module

726-48-02 x1xx to x0xx (first 4 digits)