Page 2 of 2

Re: Cruise Activation BA/BF Ford Falcon & Territory

Posted: Sat Sep 30, 2017 11:08 am
by KRL-94
unsure if they have brought out another update since I downloaded forscan on my laptop, but it was not able to be activated with my current version 2.3.8 beta.

Re: Cruise Activation BA/BF Ford Falcon & Territory

Posted: Sat Sep 30, 2017 12:21 pm
by Bobman
Yeah, hopefully they can include it. I believe it would be fairly simple to include in a new update!

Re: Cruise Activation BA/BF Ford Falcon & Territory

Posted: Sat Jul 14, 2018 5:27 am
by Bobman
Still nothing? Thought this would have been added by now :(

Re: Cruise Activation BA/BF Ford Falcon & Territory

Posted: Sun Dec 09, 2018 1:07 pm
by Pendaws
I am still waiting for this to happen? I can't get my cruise to work still after a year. I refuse to pay a FORD dealer for them to put the scanner on my car.

Re: Cruise Activation BA/BF Ford Falcon & Territory

Posted: Tue Dec 11, 2018 1:28 pm
by Bobman
An update from FORScan themselves suggests they plan to develop it however the stumbling block is that there are no reliable and cheap enough J2534 adapters that would work with all the protocols and features.

Apparently to enable cruise control on the Falcon/Territory models requires a change in the PCM VID block, which requires support of Flash EEPROM Programming Signal (FEPS), which is not available on our existing ELM327 and most J2534 adapters unfortunately!

Re: Cruise Activation BA/BF Ford Falcon & Territory

Posted: Wed Dec 26, 2018 7:28 am
by oldtinfords
Tatrix OpenPort 2.0 is a J2534 passthru interface which is recommended by PCMtec for flash tuning BA-FGX pcm's, change strategies, edit vid block etc. They are reasonably priced & work well with FORScan too. Maybe suggest the Tatrix OpenPort 2.0 as an option....people could tune with pcmtec & do module resets with FORScan.

Re: Cruise Activation BA/BF Ford Falcon & Territory

Posted: Wed Mar 20, 2019 2:55 am
by andylena
Anyone knows which block needs to be flashed to get cruise control activated on Falcon BA???
Too much already said here about, however still no any useful info at all.
Can, finally, somebody to uncover the secret???

Re: Cruise Activation BA/BF Ford Falcon & Territory

Posted: Thu Mar 21, 2019 3:16 am
by f-wolf

Re: Cruise Activation BA/BF Ford Falcon & Territory

Posted: Mon May 13, 2019 9:12 am
by AFR
It need to be enabled in the PCM. In IDS is under the heading Speed. enable /disable. Its not speed limiter as some think