Page 4 of 10

Re: mondeo mk5 other features asbuilt

Posted: Sun Apr 23, 2017 10:09 am
by Dragunov
Which hexcode do we need to change to have cornering light?

Re: mondeo mk5 other features asbuilt

Posted: Sun May 07, 2017 9:04 am
by Dragunov
Somebody?

Re: mondeo mk5 other features asbuilt

Posted: Wed Jul 12, 2017 8:27 pm
by Vispen74
Hi!
I installed a sheep china rearview camera today, Mondeo Mk5, 2015.
Original APIM 7D0-01-01:
086B 8582 3386
Changed to:
020B 8582 3386, the 2 shoul activate the camera, but it gave me "contact dealer" if I left the 6. Changing it to 0 made it work.

With this line the camera is working fine, but the graphical parking sensor dissappeared, so now there is just camera in reverse, and nothing while moving forward. Can this be fixed so they work side by side?

Re: mondeo mk5 other features asbuilt

Posted: Wed Jul 12, 2017 8:36 pm
by Vispen74
Another request:
To have the Speedometer in digits, shown on the instrument cluster, how is it done on a Mondeo 2015?

I tried IPC 720-07-01 to 0001 0000 002F, were 1 was 0 original.

Nothing shows up?

Re: mondeo mk5 other features asbuilt

Posted: Thu Jul 13, 2017 5:01 am
by AmigaSurfer
Vispen74 wrote:Hi!
I installed a sheep china rearview camera today, Mondeo Mk5, 2015.
Original APIM 7D0-01-01:
086B 8582 3386
Changed to:
020B 8582 3386, the 2 shoul activate the camera, but it gave me "contact dealer" if I left the 6. Changing it to 0 made it work.

With this line the camera is working fine, but the graphical parking sensor dissappeared, so now there is just camera in reverse, and nothing while moving forward. Can this be fixed so they work side by side?
Add the 2 to 08 and leave 6B unchanged:
0A6B 8582 3386

Re: mondeo mk5 other features asbuilt

Posted: Thu Jul 13, 2017 5:12 am
by AmigaSurfer
Vispen74 wrote:Another request:
To have the Speedometer in digits, shown on the instrument cluster, how is it done on a Mondeo 2015?

I tried IPC 720-07-01 to 0001 0000 002F, were 1 was 0 original.

Nothing shows up?
The old IPC on Mondeo 2015 shows the digital speedometer inside the analogue speedometer only. It only appears, if you disable the lane assist by pressing the button at the end of the turn-signal lever.
Some people flashed the 2015 IPC with the firmware from a 2016 IPC successfully, to get the digital speedometer between rev meter and speedometer. It's the same bit.

Re: mondeo mk5 other features asbuilt

Posted: Thu Jul 13, 2017 7:34 am
by Vispen74
AmigaSurfer wrote:
Vispen74 wrote:Another request:
To have the Speedometer in digits, shown on the instrument cluster, how is it done on a Mondeo 2015?

I tried IPC 720-07-01 to 0001 0000 002F, were 1 was 0 original.

Nothing shows up?
The old IPC on Mondeo 2015 shows the digital speedometer inside the analogue speedometer only. It only appears, if you disable the lane assist by pressing the button at the end of the turn-signal lever.
Some people flashed the 2015 IPC with the firmware from a 2016 IPC successfully, to get the digital speedometer between rev meter and speedometer. It's the same bit.
Ok, thanks!
So then I will look for a way to flash the firmware,if possible.

Re: mondeo mk5 other features asbuilt

Posted: Thu Jul 13, 2017 1:45 pm
by Vispen74
AmigaSurfer wrote:
Vispen74 wrote:Hi!
I installed a sheep china rearview camera today, Mondeo Mk5, 2015.
Original APIM 7D0-01-01:
086B 8582 3386
Changed to:
020B 8582 3386, the 2 shoul activate the camera, but it gave me "contact dealer" if I left the 6. Changing it to 0 made it work.

With this line the camera is working fine, but the graphical parking sensor dissappeared, so now there is just camera in reverse, and nothing while moving forward. Can this be fixed so they work side by side?
Add the 2 to 08 and leave 6B unchanged:
0A6B 8582 3386
This one worked like a charm, thank you!

Re: mondeo mk5 other features asbuilt

Posted: Fri Aug 25, 2017 7:00 am
by robj20
I have the fuel graph enabled but it makes out at something like 45mpg, so all my lines are maxed out when doing 60+mpg. Are there any options to increase the graph max?

Re: mondeo mk5 other features asbuilt

Posted: Mon Aug 28, 2017 4:57 pm
by Dragunov
Vispen74 wrote:
AmigaSurfer wrote:
Vispen74 wrote:Another request:
To have the Speedometer in digits, shown on the instrument cluster, how is it done on a Mondeo 2015?

I tried IPC 720-07-01 to 0001 0000 002F, were 1 was 0 original.

Nothing shows up?
The old IPC on Mondeo 2015 shows the digital speedometer inside the analogue speedometer only. It only appears, if you disable the lane assist by pressing the button at the end of the turn-signal lever.
Some people flashed the 2015 IPC with the firmware from a 2016 IPC successfully, to get the digital speedometer between rev meter and speedometer. It's the same bit.
Ok, thanks!
So then I will look for a way to flash the firmware,if possible.
I flash my modules with UCDS.

Updated my IPC, DSP and ACM with it.

Enabled Corner Light, digital speedometer (middle screen) with it