FORScan v2.4.6 beta

Testing new functions
leiwen
Posts: 5
Joined: Sat May 28, 2016 4:18 pm
Vehicle: fordkugai,2.0,2013

Re: FORScan v2.4.6 beta

Post by leiwen »

omar302 wrote:
Thu Jun 23, 2022 5:45 am
leiwen wrote:
Thu Jun 23, 2022 2:02 am
After updating DDM and PDM DTC (U2200:00Control Module Configuration Memory Corrupt),
one touch lifting cannot be learned. Can it be recovered?
Did you try to reload the As Built Data to the modules after the updates? If not, try it to see if it fixes it.
I tried and still couldn't
omar302
Posts: 310
Joined: Sat Apr 16, 2016 4:50 am
Vehicle: Ford Edge, Gasoline 2.7L/335hp, 2016

Re: FORScan v2.4.6 beta

Post by omar302 »

I don't know. Another suggestion is to re-flash the old (original) firmware.
leiwen
Posts: 5
Joined: Sat May 28, 2016 4:18 pm
Vehicle: fordkugai,2.0,2013

Re: FORScan v2.4.6 beta

Post by leiwen »

omar302 wrote:
Thu Jun 23, 2022 7:55 am
I don't know. Another suggestion is to re-flash the old (original) firmware.
I wrote the original firmware and the problem was not resolved.
User avatar
fordsmax471
Posts: 1164
Joined: Mon Aug 07, 2017 5:29 pm
Vehicle: Ford S-Max 2.0 TDCi 2017 PowerShift

Re: FORScan v2.4.6 beta

Post by fordsmax471 »

dcdc.png
dcdc.png (101.19 KiB) Viewed 320 times
Post Reply