FORScan v2.4.5 beta3

Testing new functions
paul.smirnof
Posts: 1
Joined: Wed May 26, 2021 3:26 pm
Vehicle: ford mondeo 4, 2.0 TDCI/AT, 2009

Re: FORScan v2.4.5 beta3

Post by paul.smirnof »

Hi! Thanks to the developers, I've been waiting for a long time and finally after the release of version 2.4.5.
I updated and flashed my Mondeo 4 2.0 tdci (sid-206), build Belgium.
First updated from version 8G91-12K532-AF to version 8G91-12K532-AH.
And then, in manual mode, I flashed the factory Euro-3 without DPF 8G91-12K532-LA.
Everything went off without alarms, thanks again.
Kukisch
Posts: 8
Joined: Tue Feb 21, 2017 7:24 am
Vehicle: FORD FIESTA 2005 г.в.1,4 л 87 л.с.
Location: Москва
Contact:

Re: FORScan v2.4.5 beta3

Post by Kukisch »

Сегодня битбоксом завалил MAZDA CX5 2016 г.в. Форскан подтянул сток и пролил без проблем РСМ.Авто запустилось.v2.4.5 +сканматик2 про.Время на процесс -7 минут.РСМ МИТСУБИСИ.SoftwareNumber: PSLC-188K2-B
PCM Part#(Prefix-Base-Suffix): PSLC-188K2-B
TCM Part#(Prefix-Base-Suffix): PSLB-21EM1-A
Спасибо за классную прогу.
User avatar
fordsmax471
Posts: 1104
Joined: Mon Aug 07, 2017 5:29 pm
Vehicle: Ford S-Max 2.0 TDCi 2017 PowerShift

Re: FORScan v2.4.5 beta3

Post by fordsmax471 »

Tested ;)
FORScan v2.4.5 beta3 and OBDLINK EX

Ford S-Max 2008

1. IPC Convers+ update successfully :!:
2. PAM update successfully :!:
c.ionut
Posts: 26
Joined: Thu Jun 19, 2014 8:52 pm
Vehicle: Mondeo 2.0/96kw 2004 Mondeo 2.0/120kw 2013
Location: Tulcea/Romania

Re: FORScan v2.4.5 beta3

Post by c.ionut »

Hi!
I also tested FORScan v2.4.5 beta3 and viaken stn2120 on a mondeo mk 4.5 2013 ecu dcm 3.5.

IPC Convers+ update successfully
BCM update successfully

Has anyone succeded in making the update at PCM and TCM (dct 450)?
Thanks!
kludge
Posts: 2
Joined: Thu May 20, 2021 11:56 pm
Vehicle: Ford Escape 2017 Titanium 2.0L Ecoboost

Re: FORScan v2.4.5 beta3

Post by kludge »

FORScan v2.4.5 beta3 with OBDLink EX it works on 2017 Ford Escape NA

IPC update successful.

1 thing to note. After IPC firmware update, you will need to run DTC and the error code UT2100 will pop up. To clear this, you will need to go to Configuration and Programming, then in PCM, you will need to run Module initalization/relearn vehicle data. After this process, you can clear DTC and the code should clear.
omar302
Posts: 276
Joined: Sat Apr 16, 2016 4:50 am
Vehicle: Ford Edge, Gasoline 2.7L/335hp, 2016

Re: FORScan v2.4.5 beta3

Post by omar302 »

c.ionut wrote:
Wed Dec 29, 2021 9:33 am
Hi!
I also tested FORScan v2.4.5 beta3 and viaken stn2120 on a mondeo mk 4.5 2013 ecu dcm 3.5.

IPC Convers+ update successfully
BCM update successfully
kludge wrote:
Mon Jan 03, 2022 7:27 pm
FORScan v2.4.5 beta3 with OBDLink EX it works on 2017 Ford Escape NA

IPC update successful.
Can you please share how long (time) did the update took?
User avatar
fordsmax471
Posts: 1104
Joined: Mon Aug 07, 2017 5:29 pm
Vehicle: Ford S-Max 2.0 TDCi 2017 PowerShift

Re: FORScan v2.4.5 beta3

Post by fordsmax471 »

Tested ;)
FORScan v2.4.5 beta3 and viaken stn2120 soft.ver5.6.5

Ford S-Max 2012

1. IPC Convers+ update successfully :!:
c.ionut
Posts: 26
Joined: Thu Jun 19, 2014 8:52 pm
Vehicle: Mondeo 2.0/96kw 2004 Mondeo 2.0/120kw 2013
Location: Tulcea/Romania

Re: FORScan v2.4.5 beta3

Post by c.ionut »

omar302 wrote:
Tue Jan 04, 2022 6:10 am
c.ionut wrote:
Wed Dec 29, 2021 9:33 am
Hi!
I also tested FORScan v2.4.5 beta3 and viaken stn2120 on a mondeo mk 4.5 2013 ecu dcm 3.5.

IPC Convers+ update successfully
BCM update successfully
kludge wrote:
Mon Jan 03, 2022 7:27 pm
FORScan v2.4.5 beta3 with OBDLink EX it works on 2017 Ford Escape NA

IPC update successful.
Can you please share how long (time) did the update took?
Ipc convers ~15 min
BCM < 1 min.
Exo_Strike
Posts: 8
Joined: Wed Sep 20, 2017 4:32 pm
Vehicle: F150 FX4 3.5 Ecoboost 2014

Re: FORScan v2.4.5 beta3

Post by Exo_Strike »

Still can't program into Bronco 2021 BdyCM, I have this error ''Gain security acces failedv - security key is wrong''

I try to activate Fog with High beam with drop downs menus.

I wonder if I do something wrong here. I use my VCM2 and I have a extended license with the lastest build 2.4.5 beta 3.

Thanks

Forscan.jpg
Forscan.jpg (289.83 KiB) Viewed 297 times
miz
Posts: 7
Joined: Wed Jun 19, 2019 7:23 am
Vehicle: Mazda CX-5

Re: FORScan v2.4.5 beta3

Post by miz »

Just updated PCM on CX-5 KE 2016 without any issue. vxdiag nano adapter.
IMG20220115150853.jpg
IMG20220115150853.jpg (238.8 KiB) Viewed 221 times
Post Reply