2020 Mk4 Focus

Testing new functions
Post Reply
Cortinaman
Posts: 11
Joined: Wed Oct 02, 2019 11:45 am
Vehicle: Mk4 Focus 1.0 2019

2020 Mk4 Focus

Post by Cortinaman »

Just bought a Oct 2020 Focus Active X Vignale manual and wondered what changes I can make to the Sync system. I've managed to add the heated steering wheel icon but can't find an option for seats. Also couldn't find one for different coloured buttons for audio, navigation etc... Finally, I fancied changing the splash screen from showing the Ford logo to Vignale or something
lenko
Posts: 601
Joined: Sat Dec 24, 2016 6:40 pm
Vehicle: 2015 Lincoln MKC, 2006 Mustang GT, Saleen 530 HP

Re: 2020 Mk4 Focus

Post by lenko »

APIM 7D0-02-01 xxxx x8xx xxxx - Vignale.
Cortinaman
Posts: 11
Joined: Wed Oct 02, 2019 11:45 am
Vehicle: Mk4 Focus 1.0 2019

Re: 2020 Mk4 Focus

Post by Cortinaman »

Thanks for that, got that working now :D
Cortinaman
Posts: 11
Joined: Wed Oct 02, 2019 11:45 am
Vehicle: Mk4 Focus 1.0 2019

Re: 2020 Mk4 Focus

Post by Cortinaman »

Just found the heated seat icon setting so have that now. Checked through the menu but don't have an option to change the icon button colours as I've seen some do... I also can't seem to get the speed limit icons to show on the sat nav window as |I've seen done in a video

Any other mods worth doing ?
davetcollection
Posts: 80
Joined: Sun Mar 19, 2017 4:00 pm
Vehicle: Focus '17 ST-Line 1.0 Auto, Focus 4 1.5D Titanium

Re: 2020 Mk4 Focus

Post by davetcollection »

Cortinaman wrote:
Mon Jul 19, 2021 10:24 am
Just found the heated seat icon setting so have that now. Checked through the menu but don't have an option to change the icon button colours as I've seen some do... I also can't seem to get the speed limit icons to show on the sat nav window as |I've seen done in a video

Any other mods worth doing ?
Classic theme, I believe.

Been an active X Vignale, your APIM start up screen should be Vignale anyway.

Don't use asbuilt codes go in and make changes using the drop down methods
Cortinaman
Posts: 11
Joined: Wed Oct 02, 2019 11:45 am
Vehicle: Mk4 Focus 1.0 2019

Re: 2020 Mk4 Focus

Post by Cortinaman »

It does now but, when I bought it, it just showing the blue oval Ford logo. I did change it by changing it to an 8 as suggested above which it now shows Vignale but I did also notice it showed that in the APIM as built menu.

While in the APIM as built menu I did try to select the mirrors to dip when selecting reverse but that didn't do anything. Also to display the speed limit on the sat Nav but, again, that didn't work. I did also see a German video about changing the colour of the button icons but didn't have that option on mine either
lenko
Posts: 601
Joined: Sat Dec 24, 2016 6:40 pm
Vehicle: 2015 Lincoln MKC, 2006 Mustang GT, Saleen 530 HP

Re: 2020 Mk4 Focus

Post by lenko »

Try this for speed sign in Navigation:
Navigation Speed Cameras 11-15MY APIM 7D0-02-02 xxx* xxxx xxxx, where "*" make 8=Disabled (Default), 0=Enabled. This was on a Ford Explorer spreadsheet.
Likely the same in newer vehicle. Note what the original number is so you can revert if it doesn't work.
davetcollection
Posts: 80
Joined: Sun Mar 19, 2017 4:00 pm
Vehicle: Focus '17 ST-Line 1.0 Auto, Focus 4 1.5D Titanium

Re: 2020 Mk4 Focus

Post by davetcollection »

Cortinaman wrote:
Tue Jul 20, 2021 9:08 pm

While in the APIM as built menu I did try to select the mirrors to dip when selecting reverse but that didn't do anything. Also to display the speed limit on the sat Nav but, again, that didn't work. I did also see a German video about changing the colour of the button icons but didn't have that option on mine either
Mirror tilt only works on vehicles with memory seat I'm afraid
JRCondat
Posts: 2
Joined: Thu Jun 24, 2021 11:48 am
Vehicle: Focus SW MK4 2.0 TDCI 150cv, 2019

Re: 2020 Mk4 Focus

Post by JRCondat »

The Focus MK4 isn't fully compatible with Forscan :cry: :cry: :cry:
Post Reply