Search found 258 matches

by Don Ridley
Sun May 10, 2020 1:53 pm
Forum: Configuration and Programming
Topic: CCM Configuration and Programming cannot be found
Replies: 6
Views: 216

Re: CCM Configuration and Programming cannot be found

Sorry, I don't know how to add a module. Volvo and Ford shared parts so maybe the problem is in the BCM configuration....? The BCM firmware may need to be reflashed. If you find the firmware (calibration), FOCCCUS program can flash it. But this is risky.

See if focccus can see the module.
by Don Ridley
Sun May 10, 2020 1:14 am
Forum: Configuration and Programming
Topic: CCM Configuration and Programming cannot be found
Replies: 6
Views: 216

Re: CCM Configuration and Programming cannot be found

I think there DTC is saying the module is not communicating...."missing message". Are you trying to add adaptive cruise control? You need extra hardware.
by Don Ridley
Sat May 09, 2020 10:29 pm
Forum: General and Support forum
Topic: 2014 Fiesta ST Door Ajar
Replies: 1
Views: 59

Re: 2014 Fiesta ST Door Ajar

Look for the PID that identifies the door latch status. I think the door ajar switch is integral to the latch.
See if there are any DTCs related to the door module.
by Don Ridley
Thu May 07, 2020 10:28 pm
Forum: General and Support forum
Topic: TURNING ON REAR SPAEKERS ON FORD CUSTOM
Replies: 1
Views: 63

Re: TURNING ON REAR SPAEKERS ON FORD CUSTOM

See the ACM settings in the F150 spreadsheet.... assuming you have an ACM.
by Don Ridley
Wed May 06, 2020 9:16 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: Engineering Mode
Replies: 1
Views: 355

Re: Engineering Mode

You need an extended license.
You can access extra configuration options in BdyCM (main) by selecting the mode in the upper left corner.
by Don Ridley
Tue May 05, 2020 10:32 pm
Forum: General and Support forum
Topic: 2019 F150 code spreadsheet
Replies: 20
Views: 30176

Re: 2019 F150 code spreadsheet

The reality is far too many people jump into this forum and the world of Forscan without understanding the basics of the platform. Many forum posts go unanswered.... because the this stuff is complicated and vehicle specific. Until you have monitored posts for a while and even attempted to help othe...
by Don Ridley
Tue May 05, 2020 10:08 pm
Forum: Configuration and Programming
Topic: Activate Rear Speakers Fiesta Mk7.5
Replies: 3
Views: 751

Re: Activate Rear Speakers Fiesta Mk7.5

If your Fiesta has an ACM, look at the ACM settings in the F150 spreadsheet and turn on the speakers. You should also confirm your ACM has 4 speaker outputs by comparing part numbers by or as built configurations.
by Don Ridley
Tue May 05, 2020 2:50 pm
Forum: Configuration and Programming
Topic: plug in tailgate light bar
Replies: 1
Views: 94

Re: plug in tailgate light bar

My Ford (non-F150) has a menu option for led trailer lights. If your light bar has a low current draw maybe setting the trailer to std lights will not activate the "trailer attached" function. The trailer light function is in one of the non-asbuilt module menus. Otherwise, you will have to wire the ...
by Don Ridley
Sat May 02, 2020 10:30 pm
Forum: General and Support forum
Topic: Drivers front foglight
Replies: 2
Views: 116

Re: Drivers front foglight

Model and year of vehicle? Your testing shows there is a short in the wiring harness. If the error shows when the fog light is not plugged into the harness then you will likely find no voltage at the BCM (circuitry is protecting from the short). You will eventually have to inspect the wiring harness...
by Don Ridley
Thu Apr 30, 2020 6:06 pm
Forum: Configuration and Programming
Topic: USING FORSCAN WITH OTHER VEHICLES
Replies: 4
Views: 209

Re: USING FORSCAN WITH OTHER VEHICLES

2001 may not have many things you can change or adjust. My 1997 E350 connects to Forscan but there is nothing interesting I can do.