Search found 260 matches

by Don Ridley
Mon Jun 15, 2020 10:08 pm
Forum: Configuration and Programming
Topic: Approach light programming Transit connect
Replies: 9
Views: 214

Re: Approach light programming Transit connect

You really should have a BdyCm Central Configuration (main) option. This is where most of the configuration can be done. The CC selection will open a list of 100+ options looking like this: drl01.JPG Many selections will not work because of the various firmware versions. For example, the DRLs in my ...
by Don Ridley
Mon Jun 15, 2020 6:20 pm
Forum: Configuration and Programming
Topic: Approach light programming Transit connect
Replies: 9
Views: 214

Re: Approach light programming Transit connect

Nice. I know this change is only possible on late production 2016 and newer. I thought there was a CC option but nice to know you can do it directly in as built. Good job.
by Don Ridley
Mon Jun 15, 2020 6:04 pm
Forum: Configuration and Programming
Topic: Approach light programming Transit connect
Replies: 9
Views: 214

Re: Approach light programming Transit connect

You should have the same modules. You can't edit BCM data using as built in a Transit Connect. You must use central configuration. You have a Transit CONNECT not a regular Transit van....right?
by Don Ridley
Sat Jun 13, 2020 9:44 pm
Forum: General and Support forum
Topic: Missing Modules with OBDLink EX Ford E150
Replies: 2
Views: 103

Re: Missing Modules with OBDLink EX Ford E150

Older vehicles have fewer modules. Pull your as built data from the Motorcraft site and see what it shows.
by Don Ridley
Fri Jun 12, 2020 4:02 pm
Forum: Configuration and Programming
Topic: Ford As-Built Data - update in ECU?
Replies: 2
Views: 194

Re: Ford As-Built Data - update in ECU?

No. Focus uses central configuration, Mondeo does not.
by Don Ridley
Wed Jun 10, 2020 2:02 pm
Forum: Configuration and Programming
Topic: 2015 Ford Focus ST Spreadsheet
Replies: 2
Views: 163

Re: 2015 Ford Focus ST Spreadsheet

Most Focus changes use central configuration. IPC and ACM can be changed using as built. Look on Focus forums for IPC changes (start up logo etc). See F150 spreadsheet for ACM.
by Don Ridley
Tue Jun 09, 2020 3:04 pm
Forum: Configuration and Programming
Topic: No Central Configuration in Forscan
Replies: 1
Views: 118

Re: No Central Configuration in Forscan

You need an ELM327 adapter and an extended license. If you adapter does not show IPC and BdyCM modules, the adapter is not reading the MS CAN.
by Don Ridley
Mon Jun 08, 2020 3:38 pm
Forum: Configuration and Programming
Topic: Ford focus rs mk3 2017. Need codes for cruise control
Replies: 2
Views: 187

Re: Ford focus rs mk3 2017. Need codes for cruise control

You should be able to activate it in BdyCM (Main) using the menu selections. Also look for IPC settings. You will need an extended license.
by Don Ridley
Tue Jun 02, 2020 9:12 pm
Forum: Configuration and Programming
Topic: 2018 Econoline Cruise Control
Replies: 3
Views: 329

Re: 2018 Econoline Cruise Control

Econoline and Fusion IPC are probably very different. Do the same procedure....find a vehicle with similar features and cruise control. Copy the entire IPC as built file and load it into your IPC. If there are problems, study the data and see what is different.