Search found 205 matches

by twisterrescue
Mon Nov 04, 2019 10:46 pm
Forum: General and Support forum
Topic: Program New Key+Fob 2015 F150 (1 Orig Key) - Possible w/ PATS?
Replies: 1
Views: 409

Re: Program New Key+Fob 2015 F150 (1 Orig Key) - Possible w/ PATS?

FORD DEALER ONLY or LOCKSMITH w/required software .2900.00 per year LOVE IT!
by twisterrescue
Thu Oct 10, 2019 1:54 am
Forum: Diagnostics and Maintenance using FORScan
Topic: 02 F150 Cranks Won't Start, Shuts off at intersections
Replies: 6
Views: 305

Re: 02 F150 Cranks Won't Start, Shuts off at intersections

sorry i do not have a wiring diagram .for your year f150 .but have seen a few where the underhood micro and mini relays .fail when they heat up swap the pcm power relay w/and unneeded relay like a/c or rear defroster .if the pcm relay is bad .the scan tool will not show a fault .as it thinks you tur...
by twisterrescue
Wed Aug 07, 2019 1:39 am
Forum: Configuration and Programming
Topic: Need help with 2011 Fusion OEM Sony sound system
Replies: 1
Views: 130

Re: Need help with 2011 Fusion OEM Sony sound system

look in acm module programming .try to disable SONY .it brings the acm power output way down .but be careful it may way overdrive the amp.
by twisterrescue
Wed Aug 07, 2019 1:30 am
Forum: General and Support forum
Topic: Cant write to IPC module - all others work
Replies: 4
Views: 314

Re: Cant write to IPC module - all others work

I will grab a new 2019 fusion tomorrow .and try a mod and update asap
by twisterrescue
Wed Aug 07, 2019 1:14 am
Forum: Configuration and Programming
Topic: HP Windows 10 not letting Forscan app open
Replies: 12
Views: 5149

Re: HP Windows 10 not letting Forscan app open

I went to lenovo support .downloads it showed trouble fixes for my factory shipped system .my problem was not the same .it would not even allow the ftdi drivers to install .it kept saying you have the most up to date drivers .if you can access the Forscan logs in the forscan folder .send it FORSCAN ...
by twisterrescue
Sat Jun 08, 2019 2:02 am
Forum: Configuration and Programming
Topic: Adding remote start to 2011 Fusion
Replies: 7
Views: 1003

Re: Adding remote start to 2011 Fusion

bcm connector (2280c) pin#14 blue orange needs to show ground w/hood closed .for remote start . as for fog lamps (c2280B) left side pin 12 brown. right side pin 5 yellow orange . plus headlamp switch needs changed .and programming to ipcm for fog indicator to work like factory
by twisterrescue
Tue Jun 04, 2019 11:13 pm
Forum: Configuration and Programming
Topic: Whats needed to add remote start to 2014 Fusion Flip Key
Replies: 1
Views: 276

Re: Whats needed to add remote start to 2014 Fusion Flip Key

Answer further READING ! IPCM is only menu BCM needs files updated!
by twisterrescue
Mon May 13, 2019 10:48 pm
Forum: Configuration and Programming
Topic: 2012 F150 trailer brake control
Replies: 3
Views: 454

Re: 2012 F150 trailer brake control

I think bcm module need,s update also run bcm config&programing .not the as built it should show trailer brake module .disabled edit to enabled and hit write
by twisterrescue
Mon May 13, 2019 10:44 pm
Forum: Configuration and Programming
Topic: Sync 3 Software
Replies: 2
Views: 720

Re: Sync 3 Software

RE sync 3 .upgrade there are TWO files (2.1 WO/FACTORY NAV ) & (3.0 with factory nav. they are NOT swap able ) and last note I went to fords sync my ride by vin# took the 45 minute download extracted it .to 8 gig fat 32 stick .40 more minutes .then placed in car running 1 hour later it completed . 3...
by twisterrescue
Tue May 07, 2019 2:13 am
Forum: Configuration and Programming
Topic: PATS Programming 2001 Mustang
Replies: 5
Views: 425

Re: PATS Programming 2001 Mustang

FORDS pats system .if in theft mode will NOT KILL key on power to obd2 connector .it will kill starter fuel & spark .it sounds like your blue /green stripe from ign switch .is not powering up required .(run) systems