Search found 608 matches

by denbo
Thu Nov 28, 2019 6:24 am
Forum: General and Support forum
Topic: 2019 F350 DRW Double Horn Honk disable
Replies: 5
Views: 113

Re: 2019 F350 DRW Double Horn Honk disable

Lots of people have done this. Use the search button and i,m sure you will find loads of info.
by denbo
Thu Nov 28, 2019 6:21 am
Forum: General and Support forum
Topic: Clear DTCs on one module only
Replies: 8
Views: 175

Re: Clear DTCs on one module only

If you clear dtc, that is what it will do. If you reset the module, you will put all the settings back to as new. You will have a engine running a little bit off song until it relearn,s.
by denbo
Wed Nov 27, 2019 11:45 am
Forum: Configuration and Programming
Topic: Spread sheet 2016 ranger
Replies: 9
Views: 223

Re: Spread sheet 2016 ranger

Everyone on here is just like you,,, a novice. Did you try the search button? Im sure there will be something on the ford site, this can be found in search. Are you europe or usa, as there is a difference. Sorry i cannot help as its not something i have done. Try to help others like you and post any...
by denbo
Tue Nov 26, 2019 5:14 pm
Forum: Configuration and Programming
Topic: Fiesta 2018 1.5 BHP increase
Replies: 3
Views: 300

Re: Fiesta 2018 1.5 BHP increase

I strongly advise you to take it to the pros who do this for a living. Getting a remap is easy; getting a good remap is something else.
by denbo
Tue Nov 26, 2019 5:05 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: Egr fault and engine error
Replies: 4
Views: 262

Re: Egr fault and engine error

There is a updated EGR valve for these. Also there is a software update available from Ford.
by denbo
Mon Nov 25, 2019 7:40 am
Forum: Configuration and Programming
Topic: Fiesta 2018 1.5 BHP increase
Replies: 3
Views: 300

Re: Fiesta 2018 1.5 BHP increase

A remap is something that is done with a programmer NOT with forscan
by denbo
Mon Nov 25, 2019 7:38 am
Forum: Configuration and Programming
Topic: How to activate headlamp washer Ford Focus mk3 lift 2014-2018?
Replies: 1
Views: 171

Re: How to activate headlamp washer Ford Focus mk3 lift 2014-2018?

Do you have power and grounds at the washer pump?
by denbo
Mon Nov 25, 2019 7:32 am
Forum: Diagnostics and Maintenance using FORScan
Topic: Egr fault and engine error
Replies: 4
Views: 262

Re: Egr fault and engine error

What is the exact fault code and where did you get the new egr?
by denbo
Fri Nov 22, 2019 8:49 am
Forum: General and Support forum
Topic: ranger 2015 3.2 not reset faults
Replies: 1
Views: 112

Re: ranger 2015 3.2 not reset faults

If your sure the faults have been repaired try an old trick. Disconnect another sensor to introduce another code. Try airflow meter or temp sensor. Then try to delete all codes. It has worked for me a few times.
by denbo
Thu Nov 21, 2019 8:19 am
Forum: Adapters & Connection
Topic: 2018 kuga service procedure
Replies: 1
Views: 517

Re: 2018 kuga service procedure

Check the voltage, connect a charger and test. Is it supported?