Search found 622 matches

by denbo
Thu Dec 26, 2019 2:41 am
Forum: General and Support forum
Topic: 06 explorer no crank no start
Replies: 3
Views: 83

Re: 06 explorer no crank no start

First thing to do, check with spare key, call a good mobile key man.
by denbo
Wed Dec 25, 2019 10:23 am
Forum: Configuration and Programming
Topic: extra keys on 2007 facelift C-max flexifuel 1.8
Replies: 1
Views: 66

Re: extra keys on 2007 facelift C-max flexifuel 1.8

You can test it before use. Look in "diagnostic". But don,t expect anything but trouble with that ting tong key.
by denbo
Sun Dec 22, 2019 5:17 am
Forum: General and Support forum
Topic: 2018 F150 not loading all modules
Replies: 8
Views: 428

Re: 2018 F150 not loading all modules

The ones with the switch are what i use.
by denbo
Sun Dec 22, 2019 5:15 am
Forum: General and Support forum
Topic: Ford Focus 2008 LT Instrument Cluster
Replies: 1
Views: 45

Re: Ford Focus 2008 LT Instrument Cluster

What i do with these cluster is, take it out and strip it to get at the printed circuit board. I use a soft tooth brush and contact cleaner. If you look at the board very closely, you may see tiny black spots. These must be cleaned off.
by denbo
Thu Dec 19, 2019 9:02 am
Forum: Configuration and Programming
Topic: Crown VIC 2009 - Phone Consultation - I'm paying
Replies: 4
Views: 292

Re: Crown VIC 2009 - Phone Consultation - I'm paying

Well i hope your going to buy the real IDS, because the clone copies are useless.
by denbo
Thu Dec 19, 2019 8:56 am
Forum: Diagnostics and Maintenance using FORScan
Topic: FORE Scan Lite iOS
Replies: 2
Views: 123

Re: FORE Scan Lite iOS

Well for sure you need a laptop based forscan and a usb with switch, then upload to get the extended license.
by denbo
Wed Dec 18, 2019 8:49 am
Forum: General and Support forum
Topic: ForScan 2010 Ford Escape
Replies: 1
Views: 60

Re: ForScan 2010 Ford Escape

No, not with forscan. You need a programmer.
by denbo
Tue Dec 17, 2019 8:03 am
Forum: Diagnostics and Maintenance using FORScan
Topic: 2012 Mondeo boost fault
Replies: 5
Views: 220

Re: 2012 Mondeo boost fault

A good smoke machine would be a good tool for this.
by denbo
Tue Dec 17, 2019 8:01 am
Forum: Diagnostics and Maintenance using FORScan
Topic: ABS Service bleed sequence
Replies: 1
Views: 206

Re: ABS Service bleed sequence

Follow the procedure, its that way for a reason.
by denbo
Tue Dec 17, 2019 7:58 am
Forum: Diagnostics and Maintenance using FORScan
Topic: Mondeo 2.0 tdci MK3 starts then cuts off
Replies: 3
Views: 216

Re: Mondeo 2.0 tdci MK3 starts then cuts off

Graph the fuel pressure with desired and actual. See if the pressure is going too high. This can indicate a bad injector.