Search found 189 matches

by Juice
Sat Apr 18, 2020 11:29 am
Forum: Configuration and Programming
Topic: reprogram the PCM to factory mode
Replies: 4
Views: 265

Re: reprogram the PCM to factory mode

Not at this time. Possibly in the future.
You need Ford Ids. Or restore to stock with the tumer device that flashed the custom tune.
Im guessing you dont have that device.
by Juice
Fri Apr 17, 2020 9:41 pm
Forum: General and Support forum
Topic: 2013 mustang gt power steering problem
Replies: 4
Views: 236

Re: 2013 mustang gt power steering problem

I do belive you need windows version with extended license.
by Juice
Fri Apr 17, 2020 7:40 pm
Forum: Configuration and Programming
Topic: reprogram the PCM to factory mode
Replies: 4
Views: 265

Re: reprogram the PCM to factory mode

Like a custom tune? Or other modification?
by Juice
Thu Apr 16, 2020 6:19 pm
Forum: General and Support forum
Topic: 2013 mustang gt power steering problem
Replies: 4
Views: 236

Re: 2013 mustang gt power steering problem

You have 3 steering angle sensor codes. Need to resolve those. It either needs to be calibrated, OR it has failed. I did not research your steering codes. From what I have read, these EPAS racks do wear out/fail. I just put one in mine, upgraded from hydraulic P/S. It just worked. No calibration nee...
by Juice
Wed Apr 15, 2020 2:14 pm
Forum: Configuration and Programming
Topic: 2017 GT Mustang Codes
Replies: 1
Views: 182

Re: 2017 GT Mustang Codes

No, F150 is different.
There was not much on my 07 either. Had to figure it out by trial and error.
by Juice
Tue Apr 14, 2020 11:36 pm
Forum: Configuration and Programming
Topic: Can't reactivate seat belt light/chime in a BR Ford Fiesta
Replies: 2
Views: 149

Re: Can't reactivate seat belt light/chime in a BR Ford Fiesta

Have you tried the metbod in the owner's manual? Any Ford I ever owned had a procedure in the manual to turn beltminded on/off.
Once I tried to deactivate beltminder with Forscan, the change appear to take, but it didnt work. The steps in the owner's manual did.
by Juice
Sun Apr 12, 2020 1:14 pm
Forum: Configuration and Programming
Topic: Disable Hyper flash on 2013 Ford Mustang
Replies: 2
Views: 357

Re: Disable Hyper flash on 2013 Ford Mustang

I dont have a 2013. After many attempts at finding no way to disable bulb check on my 2007, I ended up adding resistors.
by Juice
Wed Apr 08, 2020 10:49 am
Forum: Configuration and Programming
Topic: IPC config
Replies: 3
Views: 340

Re: IPC config

Adds volt meter to display/dash board, IF it is possible. May not actually work.
by Juice
Tue Apr 07, 2020 7:29 pm
Forum: Configuration and Programming
Topic: Can't find IPC Module
Replies: 4
Views: 189

Re: Can't find IPC Module

Try answering "No" to the popup after you connect. By chosing no to use stored profile will force Forscan to rescan the modules. If you load saved profile, it does not scan.
Does Forscan find modules on both MS& HS can?
by Juice
Mon Apr 06, 2020 6:32 pm
Forum: Configuration and Programming
Topic: 2000 f150 questions about Cluster Swaps and FORScan
Replies: 2
Views: 147

Re: 2000 f150 questions about Cluster Swaps and FORScan

I did a cluster swap on my mustang, so what im posting here is from that experience. Best case scenario, you plug in the new cluster and it works. It probably will but there maybe options enabled in the new cluster that will need to be reconfigured. (Ex: my car does not have abs, my new cluster came...