Search found 19 matches

by Lee25
Sun Jan 19, 2020 1:51 pm
Forum: Configuration and Programming
Topic: These are all the modules?
Replies: 8
Views: 959

Re: These are all the modules?

I don’t think the early mk7’s had door modules, I’m sure only the facelift have them
by Lee25
Wed Oct 16, 2019 4:54 pm
Forum: Configuration and Programming
Topic: Alternator Ford Transit 2013 140hp
Replies: 2
Views: 184

Re: Alternator Ford Transit 2013 140hp

If its a mk7 diesel

Pin 1 on alternator to connector C3 pin D1 green wire
Pin 2 on alternator to connector C3 pin E2 violet/white
by Lee25
Thu Oct 10, 2019 6:33 pm
Forum: Configuration and Programming
Topic: [Solved] PATS programs one key or the other key but not both
Replies: 11
Views: 1162

Re: PATS programs one key or the other key but not both

See if you can get a second hand key and remove the transponder and place into one of your keys then try again there will be two different transponders in the the two keys so should work
by Lee25
Tue Oct 01, 2019 7:12 am
Forum: General and Support forum
Topic: help programming a key.
Replies: 8
Views: 658

Re: help programming a key.

If your stuck for a transponder see if you can find an old mk2 focus key or mk7 fiesta key and remove the transponder and use that
by Lee25
Mon Sep 30, 2019 8:07 pm
Forum: General and Support forum
Topic: help programming a key.
Replies: 8
Views: 658

Re: help programming a key.

I’m sure it has to be 40bit transponder not 80 plus i’m sure you can have up to 8 keys programmed
by Lee25
Mon Sep 30, 2019 4:54 pm
Forum: Configuration and Programming
Topic: Focus MK2 ST225
Replies: 1
Views: 169

Re: Focus MK2 ST225

If you can find it try using elm config its a lot easier to use than forscan i have used it on my mk2 focus
by Lee25
Mon Sep 30, 2019 4:51 pm
Forum: General and Support forum
Topic: help programming a key.
Replies: 8
Views: 658

Re: help programming a key.

Are you using the right transponder it should be 4D63 not 4D60 which is used on 2001-2006 transits
by Lee25
Sat Aug 17, 2019 7:38 pm
Forum: Configuration and Programming
Topic: Focus 2.5 used gem programming
Replies: 2
Views: 349

Re: Focus 2.5 used gem programming

you will have communication errors if the gem is broken or disconnected as a lot of the cars connections go thrugh the gem/bcm
by Lee25
Sat Aug 17, 2019 7:35 pm
Forum: Configuration and Programming
Topic: Ford Transit 2010
Replies: 3
Views: 289

Re: Ford Transit 2010

you don't need new transponders plus the key data is held in the bcm not the Pcm
by Lee25
Tue Jun 25, 2019 8:49 pm
Forum: General and Support forum
Topic: Programming ..
Replies: 13
Views: 949

Re: Programming ..

for what it's worth i wouldn't bother even trying this as you need the focus instruments fitted with the ecu, plus you can't use a mondeo key as they're different mondeos are 4D60 the focus are 4D63 you need to fit the focus throttle pedal as it runs through the instruments and the pats is built int...