Search found 198 matches

by twisterrescue
Sat Nov 09, 2019 2:05 am
Forum: Configuration and Programming
Topic: Copy calibration data from a 99-04 Mustang Cluster???
Replies: 2
Views: 81

Re: Copy calibration data from a 99-04 Mustang Cluster???

YOU did not provide location .but if east of miss. river UNITED RADIO is fords repair center for east of miss.river 1800-448-0944 ford cluster room good luck !
by twisterrescue
Sat Nov 09, 2019 1:27 am
Forum: Configuration and Programming
Topic: Sync 2 no Bass & Treble
Replies: 1
Views: 88

Re: Sync 2 no Bass & Treble

YOUR old screen driver needs reinstalled .read and save apim file .name file factory built .Then put your junk yard unit in car .go to configure & programming . pick apim then pick the run file . it will show the junk yard units file .pick load factory built file .then write . the unit seem,s to thi...
by twisterrescue
Thu Nov 07, 2019 11:54 pm
Forum: Configuration and Programming
Topic: 2020 Explorer Auto Start Stop
Replies: 7
Views: 603

Re: 2020 Explorer Auto Start Stop

AT THIS point .I am the only one to add remote start .to the 2020 explorer .It uses a totally new BCM W/a new module address . I and site operator are working on a FIX to allow changes to BCM IPCM FDICM .please do NOT play any more until .this is worked out . THE first 2020 escape I added remote sta...
by twisterrescue
Mon Nov 04, 2019 10:46 pm
Forum: General and Support forum
Topic: Program New Key+Fob 2015 F150 (1 Orig Key) - Possible w/ PATS?
Replies: 1
Views: 276

Re: Program New Key+Fob 2015 F150 (1 Orig Key) - Possible w/ PATS?

FORD DEALER ONLY or LOCKSMITH w/required software .2900.00 per year LOVE IT!
by twisterrescue
Thu Oct 10, 2019 1:54 am
Forum: Diagnostics and Maintenance using FORScan
Topic: 02 F150 Cranks Won't Start, Shuts off at intersections
Replies: 6
Views: 254

Re: 02 F150 Cranks Won't Start, Shuts off at intersections

sorry i do not have a wiring diagram .for your year f150 .but have seen a few where the underhood micro and mini relays .fail when they heat up swap the pcm power relay w/and unneeded relay like a/c or rear defroster .if the pcm relay is bad .the scan tool will not show a fault .as it thinks you tur...
by twisterrescue
Wed Aug 07, 2019 1:39 am
Forum: Configuration and Programming
Topic: Need help with 2011 Fusion OEM Sony sound system
Replies: 1
Views: 115

Re: Need help with 2011 Fusion OEM Sony sound system

look in acm module programming .try to disable SONY .it brings the acm power output way down .but be careful it may way overdrive the amp.
by twisterrescue
Wed Aug 07, 2019 1:30 am
Forum: General and Support forum
Topic: Cant write to IPC module - all others work
Replies: 4
Views: 247

Re: Cant write to IPC module - all others work

I will grab a new 2019 fusion tomorrow .and try a mod and update asap
by twisterrescue
Wed Aug 07, 2019 1:14 am
Forum: Configuration and Programming
Topic: HP Windows 10 not letting Forscan app open
Replies: 12
Views: 5031

Re: HP Windows 10 not letting Forscan app open

I went to lenovo support .downloads it showed trouble fixes for my factory shipped system .my problem was not the same .it would not even allow the ftdi drivers to install .it kept saying you have the most up to date drivers .if you can access the Forscan logs in the forscan folder .send it FORSCAN ...
by twisterrescue
Sat Jun 08, 2019 2:02 am
Forum: Configuration and Programming
Topic: Adding remote start to 2011 Fusion
Replies: 7
Views: 964

Re: Adding remote start to 2011 Fusion

bcm connector (2280c) pin#14 blue orange needs to show ground w/hood closed .for remote start . as for fog lamps (c2280B) left side pin 12 brown. right side pin 5 yellow orange . plus headlamp switch needs changed .and programming to ipcm for fog indicator to work like factory
by twisterrescue
Tue Jun 04, 2019 11:13 pm
Forum: Configuration and Programming
Topic: Whats needed to add remote start to 2014 Fusion Flip Key
Replies: 1
Views: 261

Re: Whats needed to add remote start to 2014 Fusion Flip Key

Answer further READING ! IPCM is only menu BCM needs files updated!