Search found 138 matches

by stimpy88
Fri Mar 01, 2019 10:12 am
Forum: Diagnostics and Maintenance using FORScan
Topic: Collision & Hill start warnings on start-up
Replies: 4
Views: 218

Re: Collision & Hill start warnings on start-up

After making a few common modifications (nothing elaborate) to my 2015 Lariat F-150 SCREW, the warnings 'Hill Start Assist and 'Collision Warning Not Available' continue to show up on every restart of the vehicle. I tried to clear them with the DTC removal tool (numerous times) with no success. Has...
by stimpy88
Fri Mar 01, 2019 10:04 am
Forum: Diagnostics and Maintenance using FORScan
Topic: Errors after Forscan mods
Replies: 1
Views: 178

Re: Errors after Forscan mods

My best advice would be to download the ASBuilt data for your car, instructions for this are in this forum somewhere, and upload that to your vehicle, using ELMConfig. Last time I tried to alter this configuration on my Mondeo, I had fault codes that I could not get rid of, and the car would not sta...
by stimpy88
Wed Feb 27, 2019 7:51 pm
Forum: Adapters & Connection
Topic: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*
Replies: 95
Views: 160430

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

everything has changed in the last month as you may know , if you had a free account before , i could program modules etc , but not pats as mine is the new type requiring you log in ,now im not sure but i would use a vpn if you try now as you have to be a garage or a registered bussiness owner or e...
by stimpy88
Tue Feb 26, 2019 3:25 pm
Forum: Adapters & Connection
Topic: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*
Replies: 95
Views: 160430

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

ids is good but can be a bit slow , forscan is faster for run of the mill stuff , but ids can do things that forscan currently cant . the adaptor runs as fast as the 500k elms probably faster but not sure what forscan can take bandwidth wise , just install the drivers and away you go with forscan a...
by stimpy88
Tue Feb 26, 2019 10:02 am
Forum: Adapters & Connection
Topic: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*
Replies: 95
Views: 160430

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

£60 for vx-diag vcx-nano with ids v106.9 works with forscan all version supporting pass-threw all sold out now cheapest is £70 for the exact same can only find one at that price then goes up to £76 - $99 Thanks for that Andy. Do I read you correctly in stating that you also get a working copy of ID...
by stimpy88
Sun Feb 24, 2019 12:17 pm
Forum: Adapters & Connection
Topic: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*
Replies: 95
Views: 160430

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

£60 for vx-diag vcx-nano with ids v106.9 works with forscan all version supporting pass-threw all sold out now cheapest is £70 for the exact same can only find one at that price then goes up to £76 - $99 Thanks for that Andy. Do I read you correctly in stating that you also get a working copy of ID...
by stimpy88
Sat Feb 23, 2019 4:11 pm
Forum: Adapters & Connection
Topic: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*
Replies: 95
Views: 160430

Re: Support of J2534 (Pass-Thru) adapters in FORScan v2.2.*

UCDS adaptors... To try and make sense of the story so far... We can see that the real UCDS hardware adaptors, v3 and v4, seem to support J2534 pass through, and work with ForScan, but the problem is that the adaptor is sold as part of the Russian UCDS software, and the price is more than $260. Ther...
by stimpy88
Thu Feb 21, 2019 11:32 am
Forum: Diagnostics and Maintenance using FORScan
Topic: Code: B115E - Camera Module
Replies: 16
Views: 11497

Re: Code: B115E - Camera Module

Yes, I have heard that the problem most people have with the camera intermittently working, is due to the fact that the camera control module in the boot is badly earthed. I have heard that attaching a secondary earth also is a permanent fix to this issue. There is at least one video, made within th...
by stimpy88
Tue Feb 19, 2019 12:40 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: Service Procedure is not supported (PCM Reset)
Replies: 3
Views: 347

Re: Service Procedure is not supported (PCM Reset)

It's odd that it won't reset the module. Sounds like a ForScan bug.

Forscan also should reset the module when you perform a code clear... Does that fail too?
by stimpy88
Tue Feb 19, 2019 12:38 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: Trying to fix mirror folding in Mondeo
Replies: 1
Views: 214

Re: Trying to fix mirror folding in Mondeo

Sounds to me like the motor, or the wiring to it is bad...