Search found 10 matches

by fl3
Mon Apr 22, 2019 10:01 am
Forum: Configuration and Programming
Topic: 2015 mustang base to premium IPC
Replies: 3
Views: 642

Re: 2015 mustang base to premium IPC

Instead of updating the complete configuration which might result in a lot of issues, I would only enable the features you are missing. Which features are you trying to enable? Most of the missing features require some additional hardware like BLIS, parking sensors or adaptive cruise control. Cheers...
by fl3
Mon Apr 22, 2019 9:55 am
Forum: Configuration and Programming
Topic: 2014 MKS - Turn OFF BLIS / CTA
Replies: 3
Views: 632

Re: 2014 MKS - Turn OFF BLIS / CTA

Obviously BLIS/CTA is enabled in your IPC (intrument cluster). Just disable it: IPC: Enable CTA and BLIS 720-01-01 xxxx xxxx *xxx 0=ADCF disabled, CS disabled, CWAW disabled, CT disabled 8=ADCF enabled, CS disabled, CWAW disabled, CT disabled 1=ADCF disabled, CS disabled, CWAW disabled, CT enabled 9...
by fl3
Mon Apr 22, 2019 9:46 am
Forum: Configuration and Programming
Topic: 2018 European Tail lights on a 2016 Mustang GT
Replies: 1
Views: 390

Re: 2018 European Tail lights on a 2016 Mustang GT

Any related DTCs? A broken turn signal should show up as a DTC.

Cheers
Falk
by fl3
Sat Apr 20, 2019 5:40 pm
Forum: Configuration and Programming
Topic: Turn off PAM - 2016 Mustang
Replies: 3
Views: 1443

Re: Turn off PAM - 2016 Mustang

I guess you solved the issue a long time ago...

You would have to disable the PAM in the BCM settings:

726-46-02 xxxx xxx* xxxx Park Aid Feature Present Cfg: 0=not present, 1=present

Cheers
Falk
by fl3
Fri Apr 19, 2019 3:41 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: Parktronic retrofit fault u2100 incorrect config
Replies: 4
Views: 3199

Re: Parktronic retrofit fault u2100 incorrect config

Right well it seems like it is a wiring issue the wiring goes from the switch to a plug under the centre console, from there the wires stop? BUT about 7-8 inch in front there's another plug where the wires come from the park assist module. So seems a bit stupid that ford didn't continue the rest of...
by fl3
Sun Jan 07, 2018 12:05 pm
Forum: Configuration and Programming
Topic: How do | Adjust automatic headlight sensitivity | everest
Replies: 2
Views: 3295

Re: How do | Adjust automatic headlight sensitivity | everes

Try this one from "0" to "1".

726-26-01 xxx* xxxx xxxx Ambient Light Sensor Type Cfg: 0=Slow_FNA, 1=Fast_Row

Worked for me.

Cheers
Falk
by fl3
Sun Jan 07, 2018 11:57 am
Forum: Configuration and Programming
Topic: Adjust autolamp sensitivity?
Replies: 2
Views: 1455

Re: Adjust autolamp sensitivity?

I am not aware of a configuration setting to adjust the sensitivity. What can be done is shorten the time for the auto light to go on from 20 seconds to around 3 seconds. For adjusting the sensitivity you probably would need to tweak the sensor. It might be as simple as adding am adjustable resistor...
by fl3
Sun Jan 07, 2018 11:46 am
Forum: Configuration and Programming
Topic: How to enable 2016 USA Mustang Auto Headlamps and wipers
Replies: 2
Views: 1706

Re: How to enable 2016 USA Mustang Auto Headlamps and wipers

You can activate both features in IPC/BCM, but you need the hardware for this. For autolamps you need the light sensor which is supposed to sit in the middle of the dashboard close to the windshield. 720-01-01 xxx* xxxx xxxx AdvanceTrac Hardbutton Control (AHC), AutoHighBeam Control (AHB), Autolamp ...
by fl3
Sun Jan 07, 2018 11:39 am
Forum: Configuration and Programming
Topic: s550 Mustang codes
Replies: 17
Views: 16775

Re: s550 Mustang codes

It is the same setting as on the F150. Some guys did this already and it works.

Turn Signal Flashes (# of) SCCM 724-01-01 xxxx x*xx xx 0-3=1 flash, 4-5=2 flashes, 6-7=3 flashes, 8,9=4 flashes, A,B=5 flashes, C,D=6 flashes, E,F=7 flashes

Hope this helps.

Cheers
Falk
by fl3
Sun Jan 07, 2018 11:36 am
Forum: Configuration and Programming
Topic: How to enable line lock on V6 and EB 2015-2017 Mustang
Replies: 2
Views: 2995

Re: How to enable line lock on V6 and EB 2015-2017 Mustang

For LineLock on EB 2015-2017 Mustang you need to switch the ABS module to a GT one. The programming of the ABS module is different to the GT and does not allow line lock. They are available on Ebay for not that much money. A guy in UAE just did it. For details see here: https://www.mustang6g.com/for...