Search found 21 matches

by TheLukeMartinez
Tue Jul 07, 2020 7:59 pm
Forum: Configuration and Programming
Topic: Routing door and startup chime through speakers?
Replies: 7
Views: 2655

Re: Routing door and startup chime through speakers?

This is an old thread, but I assume it's better to revive it than make a new one. Anyway, I have a related question to the chimes: 720-01-01 xxxx xxx4 is 'Chime Generator Audio Single', which my 2019 Bullitt has from the factory, as most other Fords, etc. But how about 720-01-01 xxxx xxx2??? It say...
by TheLukeMartinez
Tue Jul 09, 2019 4:55 pm
Forum: Configuration and Programming
Topic: Memory heated/cooled seats after key cycle
Replies: 8
Views: 989

Re: Memory heated/cooled seats after key cycle

At least on 2011 Explorer with DATC the HVAC module is separate from the FCIM come to find out. Anyone familiar with UCDS and flashing firmware?
by TheLukeMartinez
Mon Jul 08, 2019 9:52 pm
Forum: Configuration and Programming
Topic: Can't configure C-CM
Replies: 3
Views: 645

Re: Can't configure C-CM

I got my part from a 14 Taurus, but it should fit - DG1T-9G768-BA. I'm wondering if the C-CM shutsdown and won't allow configuration if it doesn't have communications with the HUD module as I didn't install that. I'm going to purchase that shortly and try it out. Have you installed the HUD module y...
by TheLukeMartinez
Mon Jul 08, 2019 8:50 pm
Forum: Configuration and Programming
Topic: Memory heated/cooled seats after key cycle
Replies: 8
Views: 989

Re: Memory heated/cooled seats after key cycle

I know that for the Explorer & Edge there is an update for the FCIM because it was part of several TSBs to fix the exhaust odor coming in the vehicle at WOT. The updated FCIM software would then allow the circulation to allow outside air in for a while at wot. So updating of the FCIM is possible. N...
by TheLukeMartinez
Mon Jul 08, 2019 5:41 pm
Forum: Configuration and Programming
Topic: Memory heated/cooled seats after key cycle
Replies: 8
Views: 989

Re: Memory heated/cooled seats after key cycle

When using an IDS to update a module, there is more than one type. Under Module Programming Menu they should do a "Module Reprogramming". My dealer does not usually do correct "updates". See this for more details (https://ford.oemdtc.com/1648/module-programming-and-reprogramming-procedures-ford-lin...
by TheLukeMartinez
Mon Jul 01, 2019 7:42 pm
Forum: Configuration and Programming
Topic: Memory heated/cooled seats after key cycle
Replies: 8
Views: 989

Re: Memory heated/cooled seats after key cycle

I'd also like this to be enabled, but from I read some time ago, it has to do with the FCIM software. Some owners of Ford vehicles got this after an update was performed on the FCIM. Hmm, I will have to check if our FCIM's have any updates. I know I updated all of them when I bought the cars years ...
by TheLukeMartinez
Sat Jun 29, 2019 6:32 pm
Forum: Configuration and Programming
Topic: Memory heated/cooled seats after key cycle
Replies: 8
Views: 989

Memory heated/cooled seats after key cycle

I've been searching for a while on how to do this. I can't find anything in Ford's WSM as far as what controls it. IIRC, 17+ MY started retaining climate controlled seats on/off after key cycle. (Turn on A/C seat, shut vehicle off, exit, enter, start vehicle, cooled seat comes BACK on automatically)...
by TheLukeMartinez
Sat Jun 29, 2019 3:46 pm
Forum: Configuration and Programming
Topic: Can't configure C-CM
Replies: 3
Views: 645

Re: Can't configure C-CM

Pretty sure the IPC U0405 is from the CCM invalid configuration. What year/model did the CCM come from? Or do you have an engineering number? I am wanting to do the same mod, at this point I'm just missing the CCM pigtail and bracket. I have 3 or 4 CCM's, one was from a 2014 Explorer I know for sure.
by TheLukeMartinez
Sat Jun 29, 2019 3:20 pm
Forum: Configuration and Programming
Topic: 2018 F150 XLT adding power running boards
Replies: 3
Views: 751

Re: 2018 F150 XLT adding power running boards

Try IPC 720-07-01 XXX1-XXX-XXX
by TheLukeMartinez
Fri Mar 23, 2018 5:45 pm
Forum: Configuration and Programming
Topic: Routing door and startup chime through speakers?
Replies: 7
Views: 2655

Re: Routing door and startup chime through speakers?

wpy wrote:Many owners in China have encountered this problem,And parking sensor sounds through dashboard. Can you solve this problem? TThank you! :D
I've been working on it, not finding any info as of yet.