Search found 6 matches

by bizkitt
Tue Apr 11, 2017 8:58 pm
Forum: General and Support forum
Topic: FORScan release notes
Replies: 90
Views: 1295717

Re: FORScan release notes

Same exact issue as MarcoGaspar... Reading block 5 failed on a 07 Mondeo 2.0 TDCI, guys correct me if i`m wrong... do you need to load SBL to read the CCF form BCM? i dont think so.. you can read it by pid just send "22F105" read 512bytes from "0x00FF8000 to 0x00FF81FF" than after editing before sen...
by bizkitt
Sun Apr 09, 2017 9:13 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: elm327 with toggle switch
Replies: 6
Views: 3433

Re: elm327 with toggle switch

Just to name 2 OBDLink MX, ELS27 but there are many others, just look around for Forscan compatible devices and look for no togle and CAN MS support :D thats what you need...
by bizkitt
Sun Apr 09, 2017 4:25 pm
Forum: General and Support forum
Topic: Use forscan to ajust timeing tables/fuel trum?
Replies: 4
Views: 2258

Re: Use forscan to ajust timeing tables/fuel trum?

Hi, i`m not sure about fueling curves or timeing as most of the time they are part of the PCM (engine management module) programming, thats what tunners tweek to come up with different "maps" for cars.. but some i dont know for sure if its doable with forscan as i`m new here as well but i know a lit...
by bizkitt
Sun Apr 09, 2017 3:52 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: elm327 with toggle switch
Replies: 6
Views: 3433

Re: elm327 with toggle switch

Perfectly normal, during a complex procedure you will need to swap form one CAN network to other (High-Low) the toggle is just a cost cutting thing.. other manufatures have autoswitching components that does that automatically...
by bizkitt
Sat Apr 08, 2017 1:27 pm
Forum: Adapters & Connection
Topic: USB connector works for 2009 Ranger not for 2000 Lincoln
Replies: 2
Views: 2419

Re: USB connector works for 2009 Ranger not for 2000 Lincoln

Hello pragmatic, a simple answer would be that the 2009 Ranger is a CAN car and your ELM`s CAN pair work OK and the 2000 Lincoln is older than CAN protocol and has K and L line.. which means that your ELM`s K and L line might not work, try to hook it up to anything before 2005ish and if you cant get...
by bizkitt
Sat Apr 08, 2017 1:13 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: Clear Crash data using ELM327
Replies: 19
Views: 13584

Re: Clear Crash data using ELM327

Hi, keefShure EEPROM is usually done on a bench as its a direct HW erase and flash procedure and i highly doubt that it can be done via OBD thats why its a "bench" job :D
Cheers