Search found 35 matches

by erikfrog
Mon May 01, 2017 7:22 pm
Forum: General and Support forum
Topic: egr reset, eml light pop up
Replies: 11
Views: 9540

Re: egr reset, eml light pop up

Also same problem, after egr replace P1335-65 fault present after ignition on. Egr reset done also with Bosch KTS and original F-Com (Focom). Wirings OK, tested several EGRs new and also good used.
by erikfrog
Mon Aug 17, 2015 7:29 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: 2010 MC Mondeo DPF Fault P2002
Replies: 5
Views: 8025

Re: 2010 MC Mondeo DPF Fault P2002

post DPF pressure and rpm on graph only. It looks as damaged sensor. Of course pipes from dpf must be OK, and no hole in DPF :D
by erikfrog
Wed Jul 08, 2015 9:39 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: Powertrain light on, limp mode, no codes!
Replies: 16
Views: 15238

Re: Powertrain light on, limp mode, no codes!

In modified map you can have some dtc switched off. So if something is wrong you can't see dtc codes and fault lamp is on.
by erikfrog
Wed Jun 10, 2015 8:05 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: Activating trailer tow module
Replies: 18
Views: 22145

Re: Activating trailer tow module

No, you need to change bcm config. So only Ids, elmconfig, focom...
by erikfrog
Mon Jun 08, 2015 7:52 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: Ford Mondeo / S-max error code P2033
Replies: 29
Views: 25039

Re: Ford Mondeo / S-max error code P2033

Yes, i agree. You have confirmed what we have seen on diag.
by erikfrog
Sun Jun 07, 2015 9:56 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: Ford Mondeo / S-max error code P2033
Replies: 29
Views: 25039

Re: Ford Mondeo / S-max error code P2033

No they are not same, different plug and impedance. Measure on the plug and also ECU. No other way to help, just do elementary measurings with multimeter.

https://drive.google.com/file/d/0B0QrPG ... sp=sharing

Plug C, pin 25 supply 5v, pin 19 1st sensor, pin 20 2nd sensor.
by erikfrog
Sun Jun 07, 2015 6:37 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: Ford Mondeo / S-max error code P2033
Replies: 29
Views: 25039

Re: Ford Mondeo / S-max error code P2033

Connect on plug and measure direct on plug or (and) on ecu.
by erikfrog
Sun Jun 07, 2015 3:50 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: Ford Mondeo / S-max error code P2033
Replies: 29
Views: 25039

Re: Ford Mondeo / S-max error code P2033

supply voltage for sensor 5v is normal, output voltage to ecu depends on resistance (change temperature). Of course if shortcut you will see full 5v on diag. Normal working conditions can be for example 0,5-3v... Also you can have broken wirings from sensor plug to ecu. I have repaired it many times...
by erikfrog
Sun Jun 07, 2015 7:44 am
Forum: Adapters & Connection
Topic: J2534 Bosch KTS
Replies: 7
Views: 9920

Re: J2534 Bosch KTS

Hallo, is possible now connect ms-can on kts?
by erikfrog
Sat Jun 06, 2015 7:35 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: Ford Mondeo / S-max error code P2033
Replies: 29
Views: 25039

Re: Ford Mondeo / S-max error code P2033

Catemp 12(Egt 12) is on DPF, Catemp 11 is before DPF in pipe.