FORScan forum

Not to sound overly simplistic but have you checked your owners manual? Auto locking on my 2010 F150, 2013 F150 and 2017 Focus was done with the steering controls and ignition switch, not with Forscan.

I have this same problem with a 2010 F-150. I'm not about to spend $75 on LED turn signals until I can disable the hyperflash. There is no option to do it in the non-asbuilt GEM settings and after backing up the asbuilt settings, I could not change it in the asbuilt section either. I restored to th...

All this BS about changing battery type, blah, blah. No need to do it if you unplug the battery monitor at the battery negative cable. You suddenly get full charging instead of 80% and a lot fewer problems in the future.

https://www.ford-trucks.com/forums/1653 ... ystem.html

How amazingly lazy to find anything Driver seatbelt minder status off IPC 720-01-01 xxxx xx2x xxxx Passenger seatbelt minder status off IPC 720-01-01 xxxx xx4x xxxx Driver & passenger seatbelt minder status off IPC 720-01-01 xxxx xx0x xxxx https://cyanlabs.net/asbuilt-db/ And how amazingly self...

Don Ridley wrote: ↑

Sat Feb 11, 2023 7:30 pm

2012 Focus never had factory LEDs so Forscan can't turn on this factory option. You must install resistors or use regular bulbs.

There are some LED bulbs with built-in resistors.

Geez man, could you stop using the '!' all the freaking time?

miktt wrote: ↑

Sat Feb 04, 2023 10:55 pm

Hello, the acoustic warning and the red belt warning light can of course be turned off using forscan

What a delightfully unhelpful post !

Got some details? Spreadsheet data? Actual parameter to be changed and what to change it to?

I found my 2010 was very limited with what I could do via Forscan. Bulb outage was one of the things I never figured out. Do a deep, deep search and you may find LED bulbs that have the resistor integrated so you don't have to add one.

With my OBDII connection I have to load the maker's drivers before each use or there's no connection. I found them on the maker's website. I downloaded them and saved them but I have to load them each time.

In our older vehicles the seatbelt nag wasn't disabled with Forscan. Check your owners manual.