FORScan forum

I have a problem, which is that when I adapt the clutch, when you need to press the brake and the acceleration pedal, the revolutions only increase to 1800-1900 RPM and not 3000-3500 and pressing the acceleration pedal lights up red. My car: Focus mk2 lift 2008 2.0tdci powershift. I don't think tha...

Have you checked for corrosion on the ground on the body and the body? https://youtu.be/T8aIrchDmhI This link is what I'm talking about. The only other thing I can think of is making sure the lights, radio, and ac isn't running and you keep you foot on the brake for the whole procedure and doing the...

Also did you warm up the car first? Doesn't complete the relearn procedure properly without warming up the car first.

Have you tried with no battery charger connected and doing the BCM reset first.

How many miles on the car? If around 150,000 you might need new clutches. The service might not be completed if you have things running like the ac or if you take your foot off the brake before it says to. Also if your car is charging on a battery charger this service won't complete. You might want ...

Does anyone know if Forscn will work on Windows 11?

That other post says that he did that whole procedure while on the charger. And I am saying that it (the adaptive learning procedure) probably won't work right with it connected to the battery charger. So I'm not sure if you're understanding. Anyways have a good one.

transsmision has been rebuilt (clutch Replacement in 2015) vehicle model 2013 used VCM 2 , IDS 122.01 - Original & Registered & supported Equipment. car came with these problems, may be was on low battery, whole procedure made with charger. no signs for accident. I think if you do the Adapt...

There is a low percentage change that it might be an adapter issue. What kind do you have? Maybe try resetting the Body control module before doing that service. Other than that I don't know. ??? Good luck.

I run clutch adaptive learning, but only way i can get it to go thru is by starting the car. Gets to the drum relearn part and says err, then does not let me go any forward. Keeps asking to cycle key on while it is already on. Have you tried running a BdyCM (Body control module) reset first. And pr...