Search found 93 matches

by rich935
Sun Jun 20, 2021 9:42 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: How to perform Powershift 6DCT250 (DPS6) adaptive learning
Replies: 45
Views: 97171

Re: How to perform Powershift 6DCT250 (DPS6) adaptive learning

That other post says that he did that whole procedure while on the charger. And I am saying that it (the adaptive learning procedure) probably won't work right with it connected to the battery charger. So I'm not sure if you're understanding. Anyways have a good one.
by rich935
Sun Jun 20, 2021 1:45 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: How to perform Powershift 6DCT250 (DPS6) adaptive learning
Replies: 45
Views: 97171

Re: How to perform Powershift 6DCT250 (DPS6) adaptive learning

transsmision has been rebuilt (clutch Replacement in 2015) vehicle model 2013 used VCM 2 , IDS 122.01 - Original & Registered & supported Equipment. car came with these problems, may be was on low battery, whole procedure made with charger. no signs for accident. I think if you do the Adapt...
by rich935
Sat Jun 19, 2021 3:51 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: How to perform Powershift 6DCT250 (DPS6) adaptive learning
Replies: 45
Views: 97171

Re: How to perform Powershift 6DCT250 (DPS6) adaptive learning

There is a low percentage change that it might be an adapter issue. What kind do you have? Maybe try resetting the Body control module before doing that service. Other than that I don't know. ??? Good luck.
by rich935
Fri Dec 11, 2020 8:37 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: How to perform Powershift 6DCT250 (DPS6) adaptive learning
Replies: 45
Views: 97171

Re: How to perform Powershift 6DCT250 (DPS6) adaptive learning

I run clutch adaptive learning, but only way i can get it to go thru is by starting the car. Gets to the drum relearn part and says err, then does not let me go any forward. Keeps asking to cycle key on while it is already on. Have you tried running a BdyCM (Body control module) reset first. And pr...
by rich935
Wed Nov 11, 2020 10:28 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: How to perform Powershift 6DCT250 (DPS6) adaptive learning
Replies: 45
Views: 97171

Re: How to perform Powershift 6DCT250 (DPS6) adaptive learning

Make sure you are holding the steady the whole time. Also before you try this procedure try doing a BdyCM (body control module) reset. Let me know if that works ok. Thanks for your help on this. I got around to running it again after a reset on the BdyCM. It seemed to work alot better this time, ra...
by rich935
Mon Nov 02, 2020 6:01 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: How to perform Powershift 6DCT250 (DPS6) adaptive learning
Replies: 45
Views: 97171

Re: How to perform Powershift 6DCT250 (DPS6) adaptive learning

I have tries doing a reset on the DPS6 of my 2105 Focus SE several times with no avail. I had the clutch and TCM replaced by the dealer about 5K kms ago and i'm back to the jerking and slipping clutch symptoms. I am using Forscan with ELM 325 and everything seems to work well until I get to the 'Pe...
by rich935
Mon Nov 02, 2020 6:01 pm
Forum: Diagnostics and Maintenance using FORScan
Topic: How to perform Powershift 6DCT250 (DPS6) adaptive learning
Replies: 45
Views: 97171

Re: How to perform Powershift 6DCT250 (DPS6) adaptive learning

Make sure you are holding the steady the whole time. Also before you try this procedure try doing a BdyCM (body control module) reset. Let me know if that works ok.
by rich935
Fri Oct 23, 2020 6:28 pm
Forum: Configuration and Programming
Topic: FORScan v2.4.1 release notes
Replies: 155
Views: 86053

Re: FORScan v2.4.1 release notes

Is there anyway to download 2.4.1 or 2 ive got a apim that is going wacky so i would like to try reprograming it and see if that works or if im just going to buy a new one why not play with it and really break it. What adapter do you have? Have you done module updates yet? If not make sure it is in...
by rich935
Tue Oct 20, 2020 12:08 pm
Forum: General and Support forum
Topic: New version 2.3.36
Replies: 5
Views: 1344

Re: New version 2.3.36

Oh ok. Well that sucks for the VXDiag one. Well thanks though.
by rich935
Tue Oct 20, 2020 3:05 am
Forum: General and Support forum
Topic: New version 2.3.36
Replies: 5
Views: 1344

Re: New version 2.3.36

In the change log for this new version 2.3.36 it adds the "+ Check for a counterfeit STN 1170 chip" What is the purpose of this and what are the disadvantages of having a fake or counterfeit STN 1170 chip adapter and will an adapter with the counterfeit chip still work? Do you know what a...