FORScan forum

Ответили вам почтой.

Hello, Sorry if the previous explanation wasn't clear enough. FORScan uses strategy to identify the car configuration and uses VIN of the car only to identify this specific car. This is how it works: 1. On first connect: - FORScan reads PCM strategy and identifies the car. Two different cars with th...

PCM of almost all older cars (approximately up to 2010-2012 model years) and some new cars have vehicle information stored in so called Vehicle Identification (VID) block. The differencies between “Vehicle ID block Configuration” and normal “Module Configuration” functions are: 1. VID block is prot...

FORScan implements connection and identification logic that is similar to the one used by IDS: vehicle is identified based on PCM strategy. As soon as the vehicle is identified, it loads list of modules, PIDs, test, service functions and confguration and programming functions that are specific to th...

First of all, it is not very good idea to use a mix of different adapters and different FORScan versions. If you use a recommended adapter and last version of software, and it doesn't work as expected, the best strategy is to contact FORScan Support team for consulting. Second of all, it is not reco...

Please contact support.

Sorry, these are all GEM configuration parameters available in FORScan for your car by this moment

Different generations of F-150 have different on-board network and modules. 2010 F-150 has IC instead of IPC, GEM/SJB instead of BCM etc.

Please contact support and provide debug information, most likely it is a problem of FORScan database. You have not specified Lincoln model you have, so we are unable to research it.

This is a duplicate parameter. This happens sometimes, when the same parameter was added twice (for example, from 2 different sources). It is not a real problem as you can change any of them. If you change one of them, write to ECU, exit the function then re-enter it, you will see both of the parame...