Search found 5 matches
- Tue Jul 09, 2019 8:29 am
- Forum: Configuration and Programming
- Topic: Back at it (DIY Aux Integration via MS-CAN)
- Replies: 1
- Views: 410
Re: Back at it (DIY Aux Integration via MS-CAN)
Google brought me to https://github.com/p1ne/fdim-controller/blob/master/README.md#messages-for-fdim , where the author outlines some of the MS-CAN messages carried along the bus. One of these are interesting, namely 0x3E8. Messages for FDIM This section contains brief description of MS CAN messages...
- Tue Jul 09, 2019 8:09 am
- Forum: Configuration and Programming
- Topic: Back at it (DIY Aux Integration via MS-CAN)
- Replies: 1
- Views: 410
Back at it (DIY Aux Integration via MS-CAN)
I want to remove my factory DVD, and replace it with a Raspberry Pi entertainment setup. The rPi and screen setup is finished. I found a LVDS controller board for the LCD that accepts HDMI input, the only thing left is emulating the CAN handshake to enable the DVD on the radio. The factory DVD playe...
- Wed Oct 11, 2017 10:56 pm
- Forum: Diagnostics and Maintenance using FORScan
- Topic: Missing Turbine Shaft Speed PID in forscan
- Replies: 0
- Views: 1053
Missing Turbine Shaft Speed PID in forscan
Hi everyone, I'm trying to diagnose a helicopter noise from my 2005 Ford Freestyle LTD. The ford TSB references monitoring the Turbine Shaft Speed PID to see if the noise goes away as the shaft speed goes to zero, however, in my list of PIDs, the TSS_SRC (nor anything else labeled TSS) is available....
- Sun Apr 09, 2017 5:43 pm
- Forum: Adapters & Connection
- Topic: 2004 F150 Missing MS-CAN pin
- Replies: 1
- Views: 3697
2004 F150 Missing MS-CAN pin
I'm attempting to interface with the audio system on my F150, and from everything I've read, my truck SHOULD have the MS-CAN network. However, the pins do not appear to be populated on the OBD2 port! 2004 F-150 SuperCrew 4WD Lariat (new body style) I have the information center on my instrument cons...
- Sat Aug 20, 2016 1:48 am
- Forum: General and Support forum
- Topic: Activation needed for as-built manipulation?
- Replies: 4
- Views: 3017
Activation needed for as-built manipulation?
I just received my ELM327 in the mail today and got to play with my truck for a bit.. I plan on using FORScan for 3 purposes: [*]Program an additional key for my truck. I only have one key. I have a replacement, it just needs to be programmed. [*]Manipulate the as-built data to enable aux-in on my s...