Search found 38 matches

by theandies
Mon Jun 10, 2019 9:35 pm
Forum: Configuration and Programming
Topic: Reverse Mirror Tilt
Replies: 7
Views: 6208

Re: Reverse Mirror Tilt

I entered the codes and it works...somewhat. I can't get it to tilt both mirrors at the same time. Any ideas? Only one will work at a time as I understand it. When setup to make the mirror tilt you press the button that activates the mirror like you are adjusting it then put it in reverse. Since yo...
by theandies
Sun Jun 09, 2019 5:32 am
Forum: General and Support forum
Topic: DDM and PDM missing on 2016 Explorer XLT
Replies: 8
Views: 627

Re: DDM and PDM missing on 2016 Explorer XLT

As far as the modules all the ones I was missing appeared. So the usb device fixed the missing modules issue. I guess the Wifi handshake was too buggy for it to scan properly. Was able to do all of the mods I wanted. I disable the car running and remote not in the car honk. I also did the gear shif...
by theandies
Sun Jun 09, 2019 5:14 am
Forum: Configuration and Programming
Topic: 2015 Explorer Limited Mods list?
Replies: 0
Views: 109

2015 Explorer Limited Mods list?

Anyone have a good mods list for a 2015 Explorer Limited?
Thanks
by theandies
Sun Jun 09, 2019 1:31 am
Forum: General and Support forum
Topic: Transmission shift points after larger tires
Replies: 5
Views: 355

Re: Transmission shift points after larger tires

Transmission adaptive learning will reset if you disconnect the battery. That's should do it.
by theandies
Sat Jun 08, 2019 11:35 pm
Forum: Configuration and Programming
Topic: 19'F150 XLT Sport heated steering wheel
Replies: 3
Views: 150

Re: 19'F150 XLT Sport heated steering wheel

You'll also need a heated steering wheel. I highly doubt the install a heated enabled steering wheel in every vehicle. I know in my 2016 Fusion mods spreadsheet it says:

Enable Heated Steering Wheel Vehicle Support (Requires New Steering Wheel and HSWM Module Installed):
by theandies
Sat Jun 08, 2019 7:15 pm
Forum: Configuration and Programming
Topic: Anyone Found how to display Tire pressure on IPC?
Replies: 4
Views: 447

Re: Anyone Found how to display Tire pressure on IPC?

I did a little more digging. Here is a comparison of my IPC on our 2015 Explorer and our 2016 Fusion. The Fusion shows TPS (which I enabled through Forscan) but the Explorer doesn't. Does this mean the module is not setup to display 4 wheel TP on the left instrument display like I've enabled on my F...
by theandies
Wed Jun 05, 2019 11:45 pm
Forum: Configuration and Programming
Topic: Turning off reading one tire in TPMS
Replies: 2
Views: 211

Re: Turning off reading one tire in TPMS

So do you have the screen that shows all 4 tire pressures? There is a way to disable that screen On my 2016 Fusion I actually enabled it. Tire Pressure (TPMS) Gauge: 720-04-01 (2015+ MY) xXxx xxxx xxxx (IPC) 0 (Disabled) 4 (Enabled) Now for the required - Your configuration may be different from the...
by theandies
Fri May 31, 2019 10:11 pm
Forum: Configuration and Programming
Topic: Anyone Found how to display Tire pressure on IPC?
Replies: 4
Views: 447

Re: Anyone Found how to display Tire pressure on IPC?

That didn't work but when I looked at the IPC module, not the "as built" data, I don't see TPMS in the list. It is on the list for my 2016 Fusion so I'm thinking the 2015 Explorer's IPC module doesn't support it. If anyone has and other information on if it can be done or not please chime in!!!
by theandies
Fri May 31, 2019 10:08 pm
Forum: Configuration and Programming
Topic: TPMS
Replies: 2
Views: 194

Re: TPMS

Why didn't the wheel shop make sure your sensors were working properly before giving you back your truck. I would have demanded they make it right as I'm sure you paid a lot of money for your new wheels and sensors. That's just bad business.
by theandies
Fri May 31, 2019 5:00 pm
Forum: General and Support forum
Topic: Write or Write All
Replies: 0
Views: 101

Write or Write All

What is the better option to use. I've mostly see people using Write All in some youtube video's I've watched but I always take youtube video's with a grain of salt. I'd like to know what the dev's of FORscan and advanced users think.