FORScan forum

looking at the pic you put its a sync and not a sync 2 or 3

now you have it working correctly. see if you got any new errors. You might need to clear the exisiting ones that have been produced do to the obd reader.

use this link and get 2 months free
extlic.php

looks like that you have an issue with the ODB reader. Does it have a switch on it? if not does it support both HS amd MS-Can ? if not that is your problem. However i do not think its that though. Make sure in the connection tab setting are correct. You OBD is likely to have a switch on so make sure...

it did on my mondeo mk5

email forscan directly they will be able to assist you

well looking at the figues i would guess one of the following

2 new ones are faulty (2 &4)
or
2 old ones are faulty. (1 & 3)

Can you send over your vin so i can look your car up and see what i can find. You might need to look at a program called FoCCCus instead of using forscan.

look in the ACM 727-01-01 let us know what you have for that line in the asbuilt coding.
Do you know what you have wired the subwoofer into Aux1 Aux2? and is it defo a external sub?

its in the IPC same location as mentioned xYxx-xxxx-xxxx increase Y by 4 so if its 1 change to 5 and so on